Telex SS-1002, SS-2002RM manual Installation, Unpacking, Configuration Pre-check, DIP Switches

Page 6

Installation

Unpacking

Each SS-1002 / SS-2002 / SS-2002RM is supplied with the following items. Contact the shipper or your Audiocom dealer immediately if anything is damaged or missing. Be sure to fill out and return the product registration card to Telex to properly register your intercom station.

For SS-1002 / SS-2002 units:

Quantity Description

1SS1002 or SS2002 Intercom Station

1Warranty and registration card

1User Instructions

For SS-2002RM units:

Quantity

Description

 

 

1

SS2002RM Intercom Station

 

 

1

Warranty and registration card

 

 

1

User Instructions

 

 

4

Rubber feet (apply to bottom of SS2002RM for desktop use)

 

 

Configuration Pre-check

Before making connections, read the configuration notes that follow, and make sure that all internal controls are properly set for your intended usage. If you need to access the internal controls, remove the four screws on the front that secure the intercom station faceplate to the mounting box, then lift out the faceplate for all versions except the RM version. To access the internal controls for the RM version, remove the 10 screws securing the cover on the box and then lift the cover.

DIP Switches

Table 1 lists the DIP switch descriptions and factory default settings.

Switch

Description

Settings

Default

Number

Open=Off, Closed=On

Setting

 

 

 

 

 

1

Mic kill receive

Closed: Disabled-no mic kill

Open

Open: Enabled-mic kill active

 

 

 

 

 

 

 

2

Call signal

Closed: DC (SW1 set to UNBAL)

Open

method

Open: Audiocom (SW1 set to BAL)

 

 

 

 

 

 

3

Incoming call

Closed: Disabled

Open

beep

Open: Enabled

 

 

 

 

 

 

4

Microphone

Closed: Unbalanced

Open

type

Open: Balanced

 

 

 

 

 

 

 

Speaker beep

Closed: Enabled (DIP switch 3 must

 

5

be set to Open)

Open

for incoming call

 

Open: Disabled

 

 

 

 

 

6

Not used

Don't care

Open

 

 

 

 

7

Not used

Don't care

Open

 

 

 

 

8

Not used

Don't care

Open

 

 

 

 

6

Image 6
Contents User Instructions FCC Statement Table of Contents Features IntroductionDescription SS-1002 / SS-2002 features DIP Switches InstallationConfiguration Pre-check UnpackingMic Kill Receive Call Signal CompatibilityBalanced/Unbalanced Switch Incoming Call BeepDescription of Phantom Powered Connection Headset Connector NotesPanel Mic Connector Notes Intercom Channel ConnectionsDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Page Audiocom cable wiring diagrams Power-Up Sidetone AdjustmentHeadset/Headphone/Speaker/Microphone Selection OperationChannel Select SS-2002 & SS-2002RM Only Receiving CallsGeneral SpecificationsIntercom Channels, Balanced mode SW1 set to BAL position Dynamic-mic Headset/HandsetDimensions Speaker Output PowerTrademarks
Related manuals
Manual 26 pages 63.84 Kb

SS-2002, SS-2002RM, SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.