Polycom Installing SoundPoint IP 300 SIP, Connecting Network and Power Source, AC Power Option

Installing SoundPoint® IP 300 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 300 SIP telephone. If you re- quire additional information or assistance with your new telephone, please contact your System Administrator.

The SoundPoint® IP 300 SIP User Guide includes regulatory compliance infor- mation that your System Administrator should review and can also be found at: www.polycom.com

Connecting Network and Power Source

AC Power Option

Connect the supplied Network Cable between the LAN jack on the telephone and the LAN port on the wall or hub/switch device port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.

In-Line Power Option

If the telephone is connected to a compat- ible Ethernet switch that can provide in-line power, the telephone will use that power option. Simply plug the supplied Network cable between the LAN jack on the telephone and an available Power and Data port on the In-Line Power switch.

Cisco™Catalyst™ In-Line

Power Switch

IEEE 802.3af compliant

In-Line Power switch

2