Polycom Telepresence m100 Help Book
•Port 5060 (TCP and UDP): SIP
To specify bandwidth:
1.From the main window, click Menu > Preferences > Call Settings.
2.Click Asymmetric Network if you are using an ADSL connection in which the network transmitting bandwidth is significantly different from its receiving bandwidth.
3.Set the maximum bandwidth for outgoing calls in the Maximum Transmit Bandwidth field.
To set up encryption:
1.From the main window, click Menu > Preferences > Call Settings.
2.Choose one of these AES Encryption settings:
Settings | Description |
|
|
Off | The system places and accepts only |
unencrypted calls. The system refuses | |
| incoming encrypted call. |
|
|
On | The system places and accepts only encrypted |
calls. The system refuses incoming | |
| unencrypted call. |
|
|
Auto | The encryption is used when it is available on |
| can still connect successfully. |
|
|
To enable NAT and specify the external IP address:
1.From the main window, click Menu > Preferences > Call Settings.
2.Click Use NAT.
3.Enter the external IP address.
Callers outside the LAN use this external IP address to call your system.
Related Topics
Specifying Your Network Preferences
Specifying H.323 Settings
Specifying SIP Settings
Specifying H.323 Settings
If your network uses a gatekeeper, the system can automatically register its H.323 name and extension. This allows others to call the system by entering the H.323 name or extension instead of the IP address.
To specify H.323 settings:
1.From the main window, click Menu > Preferences > H.323.
2.Configure these settings on the H.323 Settings screen:
Settings | Description |
| Select this setting to use a gatekeeper. |
Gatekeeper | • Off - Calls do not use a gatekeeper. |
| |
|
|
20