Polycom PTB450, PTS360, BC4900, PTB410, PTQ360 Link Wireless Telephone Accessories, Battery Packs

Page 11

SpectraLink Corporation

Link Wireless Telephones and Accessories User Guide

Link Wireless Telephone Accessories

Battery Packs

Overview The wireless telephone will need to have its Battery Pack (PTS360) recharged periodically. The Nickel Metal Hydride (NiMH) rechargeable wireless telephone Battery Pack gives you four hours of talk time or 80 hours of stand-by time. Stand-by time is when the phone is turned on, but you are not using it.

Indications of low battery The wireless telephone will notify you when the charge on the Battery Pack becomes low. If the wireless telephone is in use, the BATT message will display and you will hear a soft beep through the earpiece every six seconds. You have two minutes to complete the call or change the Battery Pack.

The Battery Pack can be changed while the call is still in progress. Do not press END. Quickly remove the discharged Battery Pack and replace with a charged Battery Pack, press PWR, and then press START to resume the call in progress.

If the wireless telephone is idle, you will hear a brief modulated ring signal and the Low Battery message will display. Your wireless telephone will not operate until you replace the Battery Pack.

Depending on the charging equipment you have purchased, you will either place the wireless telephone in a Charging Stand to charge the Battery Pack, or you will remove the Pack from the wireless telephone and install it in the Charger.

Caution: Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage.

Battery Pack removal and To remove the Battery Pack, press down on the oval button above replacement the Battery Pack on the back of the wireless telephone. Slide the

Pack toward the bottom of the wireless telephone until it stops, then lift up.

To replace the Battery Pack, first properly align the top of the Battery Pack with the arrows on the label on the back of the wireless telephone. Gently press and slide the Pack toward the top of the wireless telephone until it snaps into place. You should not have to force it against the wireless telephone.

Important:

Only use SpectraLink Battery Packs with SpectraLink Wireless Telephones.

Do not dip the Battery Pack in water or throw into fire.

Do not throw away the Battery Pack with your domestic waste. Take used Battery Packs to an appropriate collection point for recycling or send them back to your supplier or servicing agent.

Part Number: 72-0075-09-C.doc

Page 10

Image 11
Contents Link Wireless Telephone and Accessories Trademark Information Table of Contents Link Wireless Telephone Model PTB450 Link Wireless Telephone Model PTB400/410 Overview Status IndicatorsQuick Start Guide Answer a call Change volume BacklightOperating Instructions Basic OperationWireless Telephone Headset Menu Options Setting User PreferencesMenu Navigation Battery Packs Link Wireless Telephone AccessoriesLink Wireless Telephone PTC400 Dual Charger Indication Light Charging Characteristic Operation Indicator lightsLink PTQ360 Quick Charger Power supply SpectraLink Corporation Link Quad Charger Model BC4900 SpectraLink Corporation General Care of the Wireless Telephone and Chargers Tips for Use Wireless Telephones Safety InformationUse While Driving Additional Safety Information for Wireless TelephonesChargers and Battery Packs Other Medical DevicesPiles InstallationsRenseignements sur la Sécurité pour les Téléphones sans Fil Atmosphère potentiellement explosivePour les véhicules équipés d’un sac gonflable Autres appareils médicauxUtilisation lors de la Conduite International Certifications Regulatory InformationFCC Information Industry Canada IC InformationSpecific Absorption Rate SAR Information