Polycom PTB410, PTS360, PTQ360, PTB450, PTC400, PTB400 manual Link Quad Charger Model BC4900

Page 16

SpectraLink Corporation

Link Wireless Telephones and Accessories User Guide

Link Quad Charger

Link Quad Charger

Model BC4900

(shown with two empty charging bays)

Overview The Link Quad Charger is designed to simultaneously charge four PTS360 NiMH (Nickel Metal Hydride) Battery Packs. The Link Quad Charger is only authorized for use in the U.S. and Canada.

The Link Quad Charger may be mounted on a horizontal or vertical surface.

Power supply The power supply that is required for this unit is the SpectraLink part number GCX100A. Set up the Link Quad Charger by plugging the power supply into the Link Quad Charger and into an appropriate wall outlet.

A solid red LED above an empty charger slot indicates that the slot is idle and ready for use. If the LEDs do not light, check the power supply and plug connection to the charger. If the charger appears to be plugged in correctly, make sure the wall outlet has power.

Position the Battery Pack in a charging slot by aligning the top of the Battery Pack with the tracks on the charging slot then gently sliding the Battery Pack upward onto the charging slot. While the Battery Pack is in the charging slot, the LED above the slot will indicate the status of the charging process and/or the Battery Pack.

LED status indicators Solid Green—the Battery Pack is charging. The Link Quad Charger takes 60-90 minutes to fully charge a Battery Pack. If the NiMH Battery Pack is hot or cold when placed in the charger, it may take longer to charge.

Flashing green—the Battery Pack is fully charged and ready for use. You may leave a fully charged Battery Pack in the Link Quad Charger. However, if you remove a fully charged Battery Pack then replace it in the charger, the charger LED will be solid green until the charger determines that this Battery Pack is fully charged. It may take a few minutes to give the flashing green indication.

Solid red or flashing red—the Battery Pack in the charger is no longer capable of retaining a charge and is not usable. If the Battery Pack will not charge, do not continue to charge the Battery Pack. Dispose of it properly and do not attempt to use it in the wireless telephone. Do not attempt to open or repair a defective Battery Pack.

Part Number: 72-0075-09-C.doc

Page 15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Link Wireless Telephone and Accessories Trademark Information Table of Contents Link Wireless Telephone Model PTB450 Link Wireless Telephone Model PTB400/410 Status Indicators OverviewQuick Start Guide Change volume Backlight Operating InstructionsBasic Operation Answer a callWireless Telephone Headset Menu Navigation Setting User PreferencesMenu Options Link Wireless Telephone Accessories Battery PacksLink Wireless Telephone PTC400 Dual Charger Operation Indicator lights Indication Light Charging CharacteristicLink PTQ360 Quick Charger Power supply SpectraLink Corporation Link Quad Charger Model BC4900 SpectraLink Corporation General Care of the Wireless Telephone and Chargers Tips for Use Safety Information Wireless TelephonesAdditional Safety Information for Wireless Telephones Chargers and Battery PacksOther Medical Devices Use While DrivingInstallations Renseignements sur la Sécurité pour les Téléphones sans FilAtmosphère potentiellement explosive PilesUtilisation lors de la Conduite Autres appareils médicauxPour les véhicules équipés d’un sac gonflable Regulatory Information FCC InformationIndustry Canada IC Information International CertificationsSpecific Absorption Rate SAR Information
Top Page Image Contents