Activating AN Intercom Network | Oracle Audio Technologies OFD-614

To set a FrontDoor unit to Passive Mode, switch dipswitch #1 UP (away from the circuit board).

Note: Any Intercoms that had been taught to this unit will have to have their memory cleared and be re-taught to the Active Unit in the network as if they were newly installed.

Note: Both steps 1 & 2 must occur within 20 seconds of each other.

1.To activate the Passive FrontDoor, press the LEARN button inside the FrontDoor unit for a second (until you hear a beep) and release it.

2.Enter the Master PIN number on the GAP:

For example: 1 2 3 4

Then enter: 0 5

After the “BEEP” press “CALL”.

3.You will hear a tone indicating a successful activation.

4.Proceed to Section 3

C.ACTIVATING THE OFD WITH A REPEATER

(WITHIN AN EXISTING NETWORK)

Note: Both steps 1 & 2 must occur within 15 seconds of each other.

1.To activate the Passive FrontDoor, press the LEARN button inside the FrontDoor unit for a second (until you hear a beep) and release it.

2.Press the LEARN button on ONE of the Repeater Units. The LED by the LEARN button will light up for several seconds and then will go out, indicating a successful activation.

3.Proceed to Section 3

(See next page for an example of an existing network with an OFD and Repeater).

- 8 -

2.1ACTIVATING AN INTERCOM NETWORK - CON'T

C.ACTIVATING THE OFD WITH AN OTIU

Model OFD-614

5/4/2006

Patents Pending

Note: If used in location that will be below -10°C (20°F) Lithium batteries are recommended.

2.1 ACTIVATING AN INTERCOM NETWORK

The FrontDoor must be taught to an intercom to form an intercom network, or must be taught into an existing network (See “Activating into an Existing Intercom Network”). The FrontDoor is fully compatible with other Oracle System Intercoms.

A.ACTIVATING THE OFD WITH AN ORACLE PORTABLE

Note: Both steps 1 & 2 must occur within 15 seconds of each other.

1.Press and release the LEARN button on an Oracle Portable Intercom (OPI).

2.Press the LEARN button inside the FrontDoor unit for a second (until you hear a beep) and release. The OPI will sound a tone indicating a successful activation.

3.Proceed to Section 3

B.ACTIVATING THE OFD WITH A FLUSH MOUNT

Note: Both steps 1 & 2 must occur within 15 seconds of each other.

1.On a Flush Mount Intercom, hold down both buttons for 3 seconds, until the channel lights start flashing quickly.

2.Press the LEARN button inside the FrontDoor unit for a second (until you hear a beep) and release. The Flush Mount will sound a tone indicating a successful activation.

3.Proceed to Section 3

-5 -

B.ACTIVATING ADDITIONAL INTERCOM UNITS BACK INTO THE NETWORK

Note: Both steps 1 & 2 must occur within 15 seconds of each other.

1.Press and release the LEARN button on an un-activated Oracle Intercom (On a Flush Mount Intercom hold down both buttons for 3 seconds, until the channel lights start flashing quickly).

OFD-614 specifications

Oracle Audio Technologies has consistently been at the forefront of high-end audio engineering, and their latest offering, the OFD-614, embodies this commitment to excellence. The OFD-614 is a premium loudspeaker designed to deliver an unparalleled listening experience, integrating cutting-edge technologies and exquisite craftsmanship.

One of the standout features of the OFD-614 is its innovative driver technology. The speaker is equipped with proprietary drivers that are optimized for efficiency and sound reproduction. The midrange drivers employ a lightweight composite diaphragm, allowing for rapid response times and reducing distortion. Meanwhile, the high-frequency drivers use a specially designed silk dome, ensuring smooth and extended high-end frequencies. This combination produces a well-balanced sound profile, capable of accurately reproducing the subtleties of music and film soundtracks.

The OFD-614 also includes a sophisticated crossover network, meticulously engineered to ensure precise timing and phase coherence. This technology plays a critical role in delivering a seamless transition between frequency ranges, allowing listeners to immerse themselves in a rich soundstage. The crossover utilizes high-quality components, including air-core inductors and film capacitors, which contribute to the speaker’s overall performance and reliability.

Another notable characteristic is the cabinet design. The OFD-614 features a rigid and well-damped enclosure, crafted from high-density MDF with internal bracing. This reduces unwanted resonance and ensures that the sound is delivered cleanly and without coloration. Additionally, the cabinet is finished with a luxurious veneer, which not only enhances aesthetic appeal but also contributes to the overall performance by adding structural integrity.

In terms of connectivity, the OFD-614 is versatile, accommodating a range of setups. It includes binding posts compatible with various cable types, ensuring compatibility with high-end audio systems. The speaker's sensitivity is rated at an impressive level, meaning it can produce concert-like sound levels even with moderately powered amplifiers.

Lastly, the OFD-614 is designed with user-friendliness in mind. With its adjustable feet and various placement options, users can easily position the speakers to enhance their listening experience, whether in a dedicated home theater or a music-centric living space.

In summary, the Oracle Audio Technologies OFD-614 combines advanced driver technology, a sophisticated crossover network, and a well-crafted cabinet design to create a loudspeaker that stands out in the high-end audio market. It ensures an immersive listening experience for audiophiles and casual listeners alike, making it a worthy investment for anyone serious about quality sound reproduction.