Oracle Audio Technologies OFD-614 warranty Beep, Activating Into AN Existing Intercom Network

Page 6

Note: Both steps 1 & 2 must occur within 20 seconds of each other.

1. Using the phone that is connected to the OTIU, once you hear a dial tone press:

* *

0 7

"BEEP"

 

 

Hang up and the LEARN light will flash for up to 15 seconds. If it does not and you hear an error tone, check the OTIU manual.

2.On the FrontDoor, press and hold down the learn button for 1 second, to put it into learn mode.

3.The OTIU will ring the telephone and a Caller ID will display "Unit Learned".

4.Proceed to Section 3

2.2ACTIVATING INTO AN EXISTING INTERCOM NETWORK

A. ACTIVATING THE OFD TO THE MAIN INTERCOM UNIT

Note: If the existing network contains a GAP, MiniGAP, or another FrontDoor see “Multi-FD Mode”.

To activate a FrontDoor into an existing intercom network, the memory on each of the Intercoms to be used, needs to be cleared.

Note: To clear the memory on an Oracle Intercom, hold down the learn button for up to 20 seconds until a tone is heard.

Note: To clear the memory on a Flush Mount Intercom, hold down both buttons of the Intercom for up to 20 seconds until a tone is heard.

Note: Both steps 1 & 2 must occur within 20 seconds of each other

1.Press and release the LEARN button on an Oracle Intercom (On a Flush Mount Intercom hold down both buttons for 3 seconds, until the channel lights start flashing quickly).

2.Press and release the LEARN button inside the FrontDoor unit.

Note: Activate all other Intercoms to this Intercom, NOT to the FrontDoor. (See example below and Step B on next page.)

Step B

Step A

Step B

Model OFD-614

5/4/2006

Patents Pending

channel lights start flashing quickly).

2.Press and release the LEARN button on the activated Oracle Intercom or Flush Mount Unit.

3.Proceed to Section 3

2.3

MULTI-OFD MODE

An Oracle FrontDoor (OFD) unit is an ‘Active’ unit that takes control of the Intercom Network. If you wish to have a second (or multiple) Oracle Frontdoor unit in the network, or if using the Frontdoor with an Oracle Gate Access Panel, or MiniGAP, then it will have to be placed in Passive mode. The Passive FrontDoor will become an accessory to the Primary FrontDoor or Gate Access Panel.

A.ACTIVATING AN OFD WITH AN OFD

To set a FrontDoor unit to Passive Mode, switch dipswitch #1 UP (away from the circuit board).

Note: Any Intercoms that had been taught to this unit will have to have their memory cleared and be re-taught to the Active Unit in the network as if they were newly installed.

Note: Both steps 1 & 2 must occur within 20 seconds of each other.

1.To activate the Passive FrontDoor, press the LEARN button inside the FrontDoor unit for a second (until you hear a beep) and release it.

2.Press the LEARN button inside the primary FrontDoor unit for a second (until you hear a beep) and release it.

3.You will hear a tone indicating a successful activation.

4.Proceed to Section 3

- 6 -

- 7 -

Page 5 Page 7
Image 6
Page 5 Page 7
Contents One year limited Warranty Table of ContentsAdjusting the Speaker Volume General Information PrefaceInstalling the OFD Activating the OFD with a Repeater Adjusting Microphone SensitivityTroubleshooting and Frequently Asked Quest Alternate Chimes for Frontdoor VS. BackdoorMounting the OFD with Mounting Tape Using the IntercomMounting the OFD with Screws Assembling the IntercomActivating AN Intercom Network Activating the OFD with AN Oracle PortableActivating the OFD with a Flush Mount MULTI-OFD Mode BeepActivating Into AN Existing Intercom Network Model OFD-614 2006 Patents Pending Model OFD-614 2006 Patents Pending Model OFD-614 2006 Patents Pending Model OFD-614 2006 Patents Pending Model OFD-614 2006 Patents Pending Model OFD-614 2006 Patents Pending

OFD-614 specifications

Oracle Audio Technologies has consistently been at the forefront of high-end audio engineering, and their latest offering, the OFD-614, embodies this commitment to excellence. The OFD-614 is a premium loudspeaker designed to deliver an unparalleled listening experience, integrating cutting-edge technologies and exquisite craftsmanship.

One of the standout features of the OFD-614 is its innovative driver technology. The speaker is equipped with proprietary drivers that are optimized for efficiency and sound reproduction. The midrange drivers employ a lightweight composite diaphragm, allowing for rapid response times and reducing distortion. Meanwhile, the high-frequency drivers use a specially designed silk dome, ensuring smooth and extended high-end frequencies. This combination produces a well-balanced sound profile, capable of accurately reproducing the subtleties of music and film soundtracks.

The OFD-614 also includes a sophisticated crossover network, meticulously engineered to ensure precise timing and phase coherence. This technology plays a critical role in delivering a seamless transition between frequency ranges, allowing listeners to immerse themselves in a rich soundstage. The crossover utilizes high-quality components, including air-core inductors and film capacitors, which contribute to the speaker’s overall performance and reliability.

Another notable characteristic is the cabinet design. The OFD-614 features a rigid and well-damped enclosure, crafted from high-density MDF with internal bracing. This reduces unwanted resonance and ensures that the sound is delivered cleanly and without coloration. Additionally, the cabinet is finished with a luxurious veneer, which not only enhances aesthetic appeal but also contributes to the overall performance by adding structural integrity.

In terms of connectivity, the OFD-614 is versatile, accommodating a range of setups. It includes binding posts compatible with various cable types, ensuring compatibility with high-end audio systems. The speaker's sensitivity is rated at an impressive level, meaning it can produce concert-like sound levels even with moderately powered amplifiers.

Lastly, the OFD-614 is designed with user-friendliness in mind. With its adjustable feet and various placement options, users can easily position the speakers to enhance their listening experience, whether in a dedicated home theater or a music-centric living space.

In summary, the Oracle Audio Technologies OFD-614 combines advanced driver technology, a sophisticated crossover network, and a well-crafted cabinet design to create a loudspeaker that stands out in the high-end audio market. It ensures an immersive listening experience for audiophiles and casual listeners alike, making it a worthy investment for anyone serious about quality sound reproduction.
Top Page Image Contents