Parts Supplied with OFD/OPI KIT

By switching dipswitch #4 UP (away from the circuit board), you can set the Indoor/Outdoor Intercom’s volume to be louder.

5.2ADJUSTING MICROPHONE SENSITIVITY

To increase the Outdoor Intercom’s microphone sensitivity, switch dipswitch #3 UP (away from the circuit board).

6.0 ALTERNATE CHIMES FOR FRONTDOOR VS. BACKDOOR

The FrontDoor can be set to ring the inside Intercom units with two alternate chime patterns, to identify which unit is signaling. Switch dipswitch #2 UP (away from the circuit board) to set a FrontDoor unit to the alternate chime tone.

7.0 TROUBLESHOOTING AND FREQUENTLY ASKED QUEST

Nothing Happens. The Intercom Does Not Function

Make sure that the Intercom has fresh batteries in it. W hen you press the CALL button, you should hear a tone. If the units have power but do not communicate, they may need to form a network. Press the LEARN button on each unit that needs to form a network and they will beep in response. You may need to clear their memory and re-teach them (see How do I Clear the Intercom’s Memory, below).

The Intercom is Not Getting the Expected Transmission Range

Trees, metal, electrical wiring or other electrical devices directly between units can limit the range, as can having it mounted on a tree, masonry, or metal surface.

NOTE: STUCCO WALLS

When used in a dwelling with stucco or cement walls, the RF range can be reduced greatly. Place the repeater close to the house to mitigate this problem.

There is a Double Beep Every Ten Minutes

The intercom is indicating that the batteries are low and need to be replaced.

How do I Clear an Intercom's Memory

(Only when used in passive mode. In active mode there is no need to erase this devices memory)

Hold the LEARN button down for 20 seconds. A tone will indicate that the unit has cleared its memory and you can re-teach it to a new intercom. If an intercom signals, while the buttons are depressed, the procedure will have to be repeated.

Model OFD-614

5/4/2006

Patents Pending

The Oracle FrontDoor (OFD) is designed for use as a Wireless Doorbell and Intercom for residential, as well as commercial applications. It is designed to tolerate severe outdoor conditions of -40 to +85 C, as well as high humidity and condensation. Since this intercom system requires no connection to wall power, it is perfect for remote locations.

The Oracle FrontDoor (OFD) features an amazing 1000’ range, and allows multiple simultaneous conversations, using a 900 MHz secure digital radio link.

Compatible with the Oracle Portable Intercom (OPI) and Oracle Flush Mount Intercom (RIFM), your intercoms form an exclusive network, and respond only to other intercoms in your network (patent pending).

When used with Oracle Telephone Interface Unit (OTIU), the Oracle FrontDoor (OFD) will ring your telephones and allow you to speak with the visitor. No wiring of any kind is required. Simply plug into any phone jack and receive your visitors on the phone. Features Caller ID and much more.

PARTS SUPPLIED WITH OFD SINGLE UNIT

1 - Oracle FrontDoor Unit (OFD)

2 – Black #8 X ¾ Assembly Screws

4 – Silver #4 X ¾ Mounting Screws

1 – Piece of 3M High Strength Mounting Tape

PARTS SUPPLIED WITH OFD/OTIU KIT

All of the parts supplied with the OFD plus: 1 - Oracle Telephone Interface Unit (OTIU) 1 – Instructions for Installing the OTIU

1 - Antenna

1 – 18V Power Adapter

1 – Phone Cord

1 – Set of 4 Bumper Feet

All of the parts supplied with the OFD plus: 1 – Oracle Portable Intercom (OPI)

1 – Instructions for Installing the OPI

1 – Set of 4 Bumper Feet

	- 10 -		- 3 -
1.1	INSTALLING THE OFD	C.	ACTIVATING THE OFD WITH A REPEATER - CON'T

Make sure that the “CALL” button is in easy reach of a visitor. The unit may be mounted with either the included screws or the included double-sided high strength tape.

NOTE: If the Repeater Units have not been previously activated to anything within an existing network, please follow the directions found

OFD-614 specifications

Oracle Audio Technologies has consistently been at the forefront of high-end audio engineering, and their latest offering, the OFD-614, embodies this commitment to excellence. The OFD-614 is a premium loudspeaker designed to deliver an unparalleled listening experience, integrating cutting-edge technologies and exquisite craftsmanship.

One of the standout features of the OFD-614 is its innovative driver technology. The speaker is equipped with proprietary drivers that are optimized for efficiency and sound reproduction. The midrange drivers employ a lightweight composite diaphragm, allowing for rapid response times and reducing distortion. Meanwhile, the high-frequency drivers use a specially designed silk dome, ensuring smooth and extended high-end frequencies. This combination produces a well-balanced sound profile, capable of accurately reproducing the subtleties of music and film soundtracks.

The OFD-614 also includes a sophisticated crossover network, meticulously engineered to ensure precise timing and phase coherence. This technology plays a critical role in delivering a seamless transition between frequency ranges, allowing listeners to immerse themselves in a rich soundstage. The crossover utilizes high-quality components, including air-core inductors and film capacitors, which contribute to the speaker’s overall performance and reliability.

Another notable characteristic is the cabinet design. The OFD-614 features a rigid and well-damped enclosure, crafted from high-density MDF with internal bracing. This reduces unwanted resonance and ensures that the sound is delivered cleanly and without coloration. Additionally, the cabinet is finished with a luxurious veneer, which not only enhances aesthetic appeal but also contributes to the overall performance by adding structural integrity.

In terms of connectivity, the OFD-614 is versatile, accommodating a range of setups. It includes binding posts compatible with various cable types, ensuring compatibility with high-end audio systems. The speaker's sensitivity is rated at an impressive level, meaning it can produce concert-like sound levels even with moderately powered amplifiers.

Lastly, the OFD-614 is designed with user-friendliness in mind. With its adjustable feet and various placement options, users can easily position the speakers to enhance their listening experience, whether in a dedicated home theater or a music-centric living space.

In summary, the Oracle Audio Technologies OFD-614 combines advanced driver technology, a sophisticated crossover network, and a well-crafted cabinet design to create a loudspeaker that stands out in the high-end audio market. It ensures an immersive listening experience for audiophiles and casual listeners alike, making it a worthy investment for anyone serious about quality sound reproduction.