1706+06*+064%1/5, Set these DIP switches

Preparation

2.For each intercom, select the channel you want to use by setting the last two DIP switches (labeled CH) inside the battery compartment to the channel you want to use. The chart on the right shows the positions to which you can set these DIP switches.

4	5	CH
		1
		2
		3
		4

#"+/2146#06"#

•Be sure you install the intercoms at least 10 feet away from each other. Placing the intercoms too close together produces feedback (a squeal or howl from the speakers). The intercoms can transmit up to 200 feet line of sight.

•Be sure all intercoms you plan to use are turned on and adjusted to the desired volume.

•Be sure both the intercom you are calling and the intercom you are using to make the call are set to the same channel and sub-tone (see “Setting the Channel and Sub-Tone” on Page 3).

• If you want all the intercoms to communicate with each other at the same time, set all intercoms to the same channel and sub-tone (see also Step 3).

• If you want one intercom to communicate only with one other intercom, set only those two intercoms to the same channel and sub-tone.

3. For each intercom, select the sub-tone		1	2	3
you want to use by setting the first three		1	2	3
you want to use by setting the first three		1
DIP switches (labeled SUB TONE) inside		2
the battery compartment to the sub-tone	TONE	3
you want to use. The chart on the right	TONE	4
you want to use. The chart on the right		4
shows the positions to which you can	SUB.	5
set these DIP switches.	SUB.
set these DIP switches.		6
		7

• If you want all the intercoms to

communicate with each other at the same time, set all intercoms to the

same channel and sub-tone (see also Step 2).

•If you receive interference on a channel you selected in Step 2, set each intercom to a different sub-tone.

/1706+0)"6*'"+06'4%1/5

You can place the intercoms on a desk or table, or mount them directly on a wall. To mount the intercoms on a wall, you need two screws for each intercom (not supplied), with heads that fit into the keyhole slots on the back of the intercom.

For each intercom, follow these steps to mount it on a wall.

1.Drill a hole slightly smaller than the screws you are using to mount the intercoms, measure a length 315/16 inches (100 mm) from that hole, then drill a second hole.

2.Thread a screw into each hole, letting the left screw’s head extend about 1/4 inch (6.5 mm) from the wall and the right screw’s head about 1/8 inch (3.5 mm) from the wall.

3.Align the intercom’s keyhole slots with the mounting screws and slide the intercom down to secure it.

4.Lift and rotate the antenna up so it stands vertically. #

43-3102 specifications

The Radio Shack 43-3102 is a versatile and compact digital multimeter designed for both hobbyists and professionals in the electronics field. Known for its reliability and ease of use, this multimeter has carved a niche for itself among DIY enthusiasts, electricians, and technicians alike.

One of the standout features of the Radio Shack 43-3102 is its ability to measure a wide range of electrical values with precision. It can measure AC and DC voltage, up to 600 volts, making it suitable for various applications, from household electrical systems to complex electronics. Additionally, it measures current (up to 10 amps), resistance (up to 20 megaohms), and diode and continuity testing, providing users with a comprehensive toolkit for troubleshooting and diagnostics.

The 43-3102 incorporates a large, easy-to-read LCD display, which enhances readability under various lighting conditions. The screen displays values clearly, allowing users to take measurements effortlessly, even in dim environments. Furthermore, the multimeter features a hold function, which freezes the current reading on the display for easy reference, promoting accuracy during measurements.

The technology behind the Radio Shack 43-3102 includes a robust microprocessor for enhanced accuracy and reliability. This chip processes sensor data to deliver precise readings across the different measurement modes. The multimeter also features automatic ranging, which eliminates the need for users to manually select the range for measurements, simplifying the operation and reducing the potential for errors.

Portability is another key characteristic of the 43-3102. Its compact design and lightweight build make it easy to carry, whether you’re working at a job site or tinkering in your home workshop. Additionally, the durable casing protects it from bumps and drops, ensuring that it can withstand the rigors of daily use in multiple environments.

Furthermore, the multimeter is equipped with a 9V battery compartment, which is easy to access, allowing for quick battery replacements.

In conclusion, the Radio Shack 43-3102 digital multimeter is an indispensable tool for those working in the field of electronics. With its extensive features, precise measurements, and user-friendly design, it serves as both a reliable companion for professionals and an educational tool for beginners exploring the world of electronics. Whether measuring voltage, current, or resistance, the 43-3102 stands out as a practical and efficient choice.