4 Using your phone
4.1Make a call
4.1.1Predialling
1Dial the number (maximum 24 digits).
2Press rkey.
• The call is initiated.
Tip
You may insert a prefix number to the beginning of your predial number, see “Set Prefix” on page 31 for more information.
4.1.2 Direct dialling
1 Press v key to take the line.
2 Dial the number.
• The call is initiated.
4.1.3 Call from redial list
1 Press pkey in idle mode.
2 Scroll :to an entry in the redial list.
3 Press rkey.
• The call is initiated.
4.1.4 Call from the call log
1 Press uin idle mode.
2 Scroll :to an entry in the call list. 3 Press rkey.
• The call is initiated.
16
Note
You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. (see “Access Call log” on page 22)
4.1.5Call from the phonebook
1 Press din idle mode.
2 Scroll :to a phonebook entry.
3 Press rkey.
•The call is initiated.
Tip
Instead of scrolling :to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2will show the entries starting with A. Pressing 2again will show the entries starting with B, etc...
4.2Answer a call
Danger
When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.
When the phone rings, press rkey.
• The call is established.
Note
Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted.
Using your phone