Note
The default pin code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.
1 Press m key in idle mode, scroll :to ADVANCE SET and press mOK, scroll : to PIN and press mOK.
2 Enter the current Master PIN when prompted and press mOK to confirm.
• The PIN entered will be shown as asterisks (*) on the screen.
3 Enter the new PIN and press mOK to confirm PIN change.
Tip
If you forget your PIN, you will need to reset your phone to its default settings. See next section “Reset Unit” for more details.
7.10Reset Unit
You can reset your phone to its default settings with this feature.
!Warning
Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.
Note
You may have to configure your phone once again. In this case the WELCOME mode will appear again after master reset. (go to chapter 3.3)
1Press m key in idle mode, scroll :to ADVANCE SET and press mOK, scroll : to RESET UNIT and press mOK.
2CONFIRM? is displayed on the screen.
3Press mOK again to confirm.
• A validation tone is emitted.
• The unit is reset to its default settings. (see “Default settings” on page 34)
7.11Country Selection
The availability of this menu is dependent on your country.
You can select another country different from the one chosen during WELCOME mode.
Note
Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc).
1 Press m key in idle mode, scroll :to ADVANCE SET and press mOK, scroll : to SEL.
COUNTRY and press mOK.
2 Scroll :to the country of your choice and press mOK.
3 CONFIRM? is displayed on the screen.
Press mOK again to confirm.
• A validation tone is emitted and the screen returns to previous menu.
Advanced settings | 33 |