Philips CD 240 manual Registration, Change Master PIN

Page 34

7.7Registration

The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be registered to one base station.

The Master PIN is required before you can register or unregister handsets.

Note

By default, the Master PIN is 0000.

1On the base station, press and hold p for approximately 5 seconds.

2On the handset, press m key, scroll :to ADVANCE SET and press mOK, scroll :to REGISTRATION and press mOK.

Note

If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.

3Enter the Master PIN when prompted and press mOK to

confirm.

Note

By default, the Master PIN is 0000.

4WAITING _ _ is displayed on the screen.

•Upon successful registration, a validation tone is emitted and the handset numbers (1 to 6) will be assigned by the base automatically.

7.8Unregister

1Press m key in idle mode, scroll :to ADVANCE SET and press mOK, scroll : to UNREGISTER and press mOK.

2Enter the Master PIN when prompted and press mOK to confirm.

Note

By default, the Master PIN is 0000.

3Scroll :to select the handset

number to unregister and press mOK.

•A validation tone is emitted to indicate successful unregistration and the screen shows UNREGISTERED.

Note

If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode.

To unregister a handset that does not belong to the CD240/245 range, you can only use the CD240/245 handset to unregister it.

7.9Change Master PIN

The Master PIN is used for setting call barring/baby call number and registration/ unregistration of handsets. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

32

Advanced settings

Page 33 Page 35
Image 34
Page 33 Page 35
Contents EN Telephone Page Table of contents Technical data Frequently asked Questions36 Index Power requirements Using GAP standard compliance ConformityElectric, Magnetic Electromagnetic Fields EMF Your phone Power supplyBatteries Guarantee Quick Start Guide What’s in the box Handset Base stationRedial key & Right Softkey p Overview of your phone Earpiece DisplayMenu key & Left Softkey m Navigation keysCall transfer key & Intercom key Battery doorMicrophone Loudspeaker Key Display icons Status barOK key Back keyOverview of the base station Paging key p Getting started Install your phoneConnect the base station Welcome mode Install batteryCharge battery TipTip Menu structure Advance SET Using your phone Handsfree answering Text or number entry Use more of your phoneKeypad lock/unlock Keys Assigned charactersStore a contact in the phonebook Activate/Deactivate loudspeaker modeModify a phonebook entry Delete Direct Access Memory Direct Access Memory6.1 Add/Edit Direct Access Memory Delete a phonebook entryMOK, scroll to Direct MEM. and press mOK Using the Redial listAccess Redial list Save a redial number into the phonebookDelete the redial list Using the Call logAccess Call log Consulting the call logDelete the call list Using the IntercomDelete a call list entry Intercom another handsetEstablish a three-party Conference call Answer an external call during intercomPaging Set Date and Time Set AlarmChain Dialling Scroll to OFF, on Once or on Daily and press mOKSet Alarm Tone Set the Ring Melody Personal settingsHandset Tones Set the Ring Volume To Personal SET and pressActivate/Deactivate Auto Answer Change the Display LanguageCall Barring Advanced settingsChange the Dial Mode country-dependent To activate/deactivate Call BarringBaby Call To activate Baby Call modeTo change Baby Call number Set Prefix SOS NumberRegistration Change Master PINReset Unit Country SelectionDefault settings Technical data DisplayIcon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a callCaller does not hear me clearly Handset warms up when making a long callMy handset keeps going into idle mode Frequent noise interference on my radio or televisionIndex Unmute Unregister Volume Index
Top Page Image Contents