Philips CD270, CD275 Check the battery level, Set the country, »» The handset starts charging

Page 13
When you see the welcome message, press [OK].
Select your country, press [OK] to confirm.
»» The country setting is saved.
Set the date and time.
»» The phone is now ready to use.
»» To set the date and time later, press [BACK] to skip this setting.
EN

AThe batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

BPlace the handset on the base station to charge the handset. When the handset is placed correctly on the base station, your hear a docking sound.

»» The handset starts charging.

Note

•• If the handset becomes warm when the batteries are being charged, it is normal.

Check the battery level

The battery icon displays the current battery level.

When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low).

When the handset is on the base station/charger, the bars keep scrolling until charging completes.

The empty battery icon flashes. The battery is low and needs recharging.

The handsets turn off if the battery is empty. If you are on the phone, you hear warning tones when the battery is almost empty.The call gets disconnected after the warning.

Set the country

To make the phone work, select your country.

1

2

3

English

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
Register your product and get support at CD270 CD275 EC Declaration of Conformity Contents Set the ring delay Remote access Alarm clock Keypad lock Locate the handsetDeclaration of conformity Power requirementsVoltages, as defined in the standard EN 60950 To avoid damage or malfunctionDisposal of your old product and batteries Compliance with EMFConsequences for the environmental and human health Congratulations on your purchase and welcome to Philips What is in the boxOverview of the phone Line cord Guarantee Quick start guideOverview of the base station Display icons Get started Install the handsetConnect the base station and charger Set the country Check the battery level»» The handset starts charging Check the signal strength What is standby mode?Switch your handset On/Off Set the date and timeMake a call CallsAnswer a call Adjust the earpiece volumeMute the microphone Turn the speaker on or offMake a conference call Toggle between two callsYou can toggle your calls in these ways Press and or OK again to confirmTransfer a call Make a call to another handsetWhile you are on the phone Toggle between callsDuring the conference call Enter text and number Text and numbersPhonebook Edit the direct access memory Direct access memoryEdit a record Delete a recordCall log View the redial records Redial listRedial a call Delete all redial recordsSelect Personal SET Handset Tones KEY BEEP, then press OK Enhance the audio quality When you are in standby mode, 1 Press MenuDial mode Call featuresAuto hang up Auto conferenceSelect ON/OFF, press OK to confirm »» The setting is saved ECO modeFirst ring Turn the first ring on/off 1 Press MenuAlarm clock Extra featuresKeypad lock Locate the handsetAuto registration Register the handsetsManual registration Turn on/off the answering machine Set the answer modeSet the answering machine Language Through the baseIncoming messages ICM AnnouncementsRecord an announcement From the base Listen to the incoming messagesDelete an incoming message From the base From the handsetRemote access Access the answering machine remotely Activate/deactivate the remote accessRemote access commands Repeat the current or listen toReceiver volume Volume Default settingsRing delay Rings Speaker volume Level Language Country dependent Handset nameDisplay Technical dataFrequently asked questions Richtlijn 1999/5/EG 1999/5/ECDirective 1999/5/CE Som framgår av direktiv 1999/5/EG0168