Philips CD270, CD275, AQ95-56F-1224KR user manual Remote access

to confirm.

»» The setting is saved.

Set the ring delay

You can set the number of times the phone rings before the answering machine picks up

Select the new setting, then press [OK]

3

Select [ANSWER MACHINE] > [SETTINGS] > [MSG QUALITY], then press [OK] to confirm.

Press MENU.

messages received from the answering machine.

1

2

Call screening

You can hear the caller while he is leaving a message. Press to pick up the call.

From the base

Press / to adjust the speaker volume during call screening. The lowest volume level turns off the call screening.

Set the sound quality of the message

You can adjust the sound quality of the

the call.

1 Press MENU.

2 Select [ANSWER MACHINE] > [SETTINGS] > [RING DELAY], then press [OK] to confirm.

3 Select a new setting, then press [OK] to

confirm.

»» The setting is saved.

Note

•• Ensure that the answering machine is switched on before this feature can be applied.

Tip

•• When you access the answering machine remotely, you are recommended to set the ring delay to [ECONOMY] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code.

Note

•• The remote access PIN code is the same as your system PIN. The preset PIN is 0000.

Change the PIN code 1 Press MENU.

2 Select [ANSWER MACHINE] > [SETTINGS] > [REMOTE ACCESS] > [CHANGE PIN], then press [OK] to

confirm.

3 Enter the old PIN, then press [OK] to confirm.

4 Enter the new PIN code, then press [OK] to confirm.

5 Enter the new PIN code again, then press [OK] to confirm.

»» The setting is saved.

34EN