Philips AQ95-56F-1224KR, CD275, CD270 user manual Frequently asked questions

Page 38

17Frequently asked questions

No signal bar displays on the screen.

•• The handset is out of range. Move it closer to the base station.

•• If the handset displays [UNREGISTERED], register the handset.

Tip

•• For more information, see “Register the handsets” on the Advanced settings section.

If I fail to register the additional handsets to the base station, what do I do?

Your base memory is full. Unregister the unused handsets and try again.

No dialing tone

•• Check your phone connections.

•• The handset is out of range. Move it closer to the base station.

No docking tone

•• The handset is not placed properly on the base station/charger.

•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.

I cannot change the settings of my voice mail, what do I do?

The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

The handset on the charger does not charge.

•• Ensure the batteries are inserted correctly.

•• Ensure the handset is placed properly on the charger. The battery icon animates when charging.

•• Batteries are defective. Purchase new ones from your dealer.

No display

•• Ensure the batteries are charged.

•• Ensure there are power and phone connections.

Bad audio (crackles, echo, etc.)

•• The handset is nearly out of range. Move it closer to the base station.

•• The phone receives interference from the nearby electrical appliances. Move the base station away from them.

•• The phone is at a location with thick walls. Move the base away from them.

The handset does not ring.

Ensure the handset ringtone is turned on.

The caller ID does not display.

•• The service is not activated. Check with your service provider.

•• The caller’s information is withheld or unavailable.

When I see [WAITING…] on the screen, what is happening with the phone?

The phone is recalling the memory of the phonebook and call log. Both information are stored in the base station.Then the handset retrieves the data from the base station after a few seconds. When you press / the call log/phonebook information is displayed on the handset.

The handset loses connection with the base

or the sound is distorted during a call. Check if the ECO mode is activated. Turn it off to increase the handset range and enjoy the optimal call conditions.

Note

•• If the above solutions do not help, disconnect the power supply from both the handset and base station. Try again after 1 minute.

38EN

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Register your product and get support at CD270 CD275 EC Declaration of Conformity Contents Alarm clock Keypad lock Locate the handset Set the ring delay Remote accessVoltages, as defined in the standard EN 60950 Power requirementsDeclaration of conformity To avoid damage or malfunctionCompliance with EMF Disposal of your old product and batteriesConsequences for the environmental and human health What is in the box Congratulations on your purchase and welcome to PhilipsLine cord Guarantee Quick start guide Overview of the phoneOverview of the base station Display icons Connect the base station and charger Install the handsetGet started »» The handset starts charging Check the battery levelSet the country Switch your handset On/Off What is standby mode?Check the signal strength Set the date and timeCalls Make a callMute the microphone Adjust the earpiece volumeAnswer a call Turn the speaker on or offYou can toggle your calls in these ways Press and or Toggle between two callsMake a conference call OK again to confirmWhile you are on the phone Make a call to another handsetTransfer a call Toggle between callsDuring the conference call Text and numbers Enter text and numberPhonebook Edit a record Direct access memoryEdit the direct access memory Delete a recordCall log Redial a call Redial listView the redial records Delete all redial recordsSelect Personal SET Handset Tones KEY BEEP, then press OK When you are in standby mode, 1 Press Menu Enhance the audio qualityAuto hang up Call featuresDial mode Auto conferenceFirst ring ECO modeSelect ON/OFF, press OK to confirm »» The setting is saved Turn the first ring on/off 1 Press MenuKeypad lock Extra featuresAlarm clock Locate the handsetManual registration Register the handsetsAuto registration Set the answering machine Language Set the answer modeTurn on/off the answering machine Through the baseRecord an announcement AnnouncementsIncoming messages ICM Delete an incoming message From the base Listen to the incoming messagesFrom the base From the handsetRemote access Remote access commands Activate/deactivate the remote accessAccess the answering machine remotely Repeat the current or listen toRing delay Rings Speaker volume Level Default settingsReceiver volume Volume Language Country dependent Handset nameTechnical data DisplayFrequently asked questions Directive 1999/5/CE 1999/5/ECRichtlijn 1999/5/EG Som framgår av direktiv 1999/5/EG0168

CD275, CD270, AQ95-56F-1224KR specifications

Philips AQ95-56F-1224KR, CD270, and CD275 are innovative products from Philips that showcase advanced technology and design, catering to the needs of modern users. Each of these models has unique features that set them apart in terms of functionality and performance.

The Philips AQ95-56F-1224KR is particularly noted for its exceptional energy efficiency and user-friendly interface. This model incorporates cutting-edge Philips technologies, providing a seamless user experience. The intuitive controls allow users to easily adjust settings, making it suitable for both casual and professional environments. Additionally, its sleek design ensures it fits perfectly within any modern setting.

CD270 and CD275 models further enhance the Philips product lineup with their robust performance and versatility. The CD270 is designed for home use, offering exceptional sound quality and connectivity options. Its wireless capabilities enable users to stream audio effortlessly from various devices, which is a significant advantage in today's connected world. Furthermore, the CD270 features a built-in equalizer, allowing users to customize their listening experience.

The CD275 extends the capabilities of the CD270, providing additional features such as a more powerful amplifier and enhanced sound processing technologies. This model is ideal for audiophiles who demand superior audio fidelity and clarity. It also includes multiple input options, ensuring compatibility with various audio sources, including USB drives, smartphones, and tablets.

All three models prioritize user experience with their low-maintenance designs and durable construction. The materials used are of high quality, ensuring longevity and resilience against daily wear and tear. Furthermore, Philips has placed a strong emphasis on sustainability across its product lineup, with energy-efficient systems that reduce environmental impact while maintaining high performance.

Overall, the Philips AQ95-56F-1224KR, CD270, and CD275 present a blend of innovation, reliability, and user-centric design. They serve diverse needs, whether for casual listening at home or professional audio requirements. With their advanced features and technologies, these models underline Philips' commitment to excellence in the consumer electronics market.
Top Page Image Contents