From the handset
1 | Tap from the main menu screen. | ||
2 | Place the mobile phone close to the base | ||
| station, then tap [Find Me] on the handset. | ||
| »»The mobile phone name is displayed | ||
| on the handset screen. | ||
3 | On the mobile phone, select Philips S10 | ||
4 | and connect. |
|
|
Enter the Bluetooth PIN/passcode on the | |||
| mobile phone, if necessary. | ||
| »»When S10/S10A and the mobile phone | ||
| are paired, | or | is displayed on |
the handset screen.
Tip
•• The default Bluetooth PIN/passcode is 0000.
Note
•• The phone can be connected up to 2 Bluetooth devices simultaneously.
•• The phone can store up to 8 devices, to which it will reconnect automatically if they are in range, and less than 2 devices are connected. If more than 8 devices have been paired, delete some devices from the list before pairing another one. See ‘Manage your mobile phone’s connection’ in this chapter for information.
•• If the name of S10/S10A exists in your mobile phone, you have to remove it from your mobile phone.Then you can do the pairing again.
Manage your mobile phone’s connection
You can manage your mobile phones list in this way:
1 | Tap from the main menu screen. |
2 | Select [Mobile/Computer]. |
»»The mobile phones and computers list are displayed.
3 Select a mobile phone, then select [Privacy mode]/[Disconnect device]/[Delete device].
Note
•• If 2 devices are connected, you have to disconnect a device before connecting another one.
•• You can see [Disconnect device] in the option list only when the mobile phone is connected; and [Connect] only when the mobile phone is disconnected.
•• For information on [Privacy mode], refer to the next section.
Mobile settings
You can set the privacy mode or change the PIN/passcode through [Mobile settings].
Privacy mode
You can select this option to set whether the mobile’s contacts are available for viewing. To access this menu, press the PIN/passcode (0000). Select among 2 options: [Auto range] and [Change PIN].
From [Auto range], you can set whether the mobile’s contacts are available for viewing. You can select among these 3 options:
•[Off] : no PIN/passcode is required to access the mobile’s contacts which are always available for viewing.
•[Auto range] : no PIN/passcode is required to access the mobile’s contacts which are available for viewing only when the mobile phone is within the
Bluetooth range.
•[PIN] : follow the
S10/S10A, but a PIN/passcode is required anytime you want to access them.
From [Change PIN], you can change your PIN/ passcode for the privacy mode.
14EN