Philips s10, S10A Delete an incoming message, Delete all old incoming messages, Call screening

Delete an incoming message

1	When you listen to the message, tap .
	»»The current message is deleted.
Delete all old incoming messages
1	Tap	from the main menu screen.
2	Select [Delete all].

»»The handset displays a confirmation request.

3 Select [Yes] to confirm.

»»All old messages are permanently deleted.

Note

•• You can only delete the read messages. No deleted messages can be recovered.

Call screening

You can hear the caller while he is leaving a

message. Press to answer the call.

Set the ring delay

You can set the number of times the phone rings before the call goes to the answering machine.

1	Tap	from the main menu screen.
2	Select [Ring delay].
3	Select a new setting.

»»The setting is saved.

Note

•• The answering machine needs to be switched on before applying this setting.

Set the sound quality of the message

You can adjust the sound quality of the messages received from the answering machine.

1	Tap	from the main menu screen.
2	Select [Message quality].
3	Select the new setting.

»»The setting is saved.

Note

•• The sound quality can only be adjusted before recording starts.

•• Depending on the sound quality, the maximum number/length of recorded messages changes. In high quality setting, a maximum of 15 mins of messages can be stored. In the low quality setting, approximately 60 minutes can be stored.

Remote access

You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code.

Note

•• The remote access PIN code is the same as your system PIN.The preset PIN is 0000.

28EN