Philips S10A, s10 user manual Call settings

Name the handset

The name of the handset can be up to 16 characters. It helps to identify a handset for conference calls if multiple handsets are connected to the base.

1	Tap	from the main menu screen.
2	Select [Phone settings] > [Phone name].
3	Enter or edit the name with the keyboard.

»»The setting is saved.

Display settings

You can change the display of the phone during standby mode.

Set the brightness, wallpaper and backlight You can change the display properties during standby mode, such as display brightness, backlight behaviour and wallpaper.

1	Tap	from the main menu screen.
2	Select [Phone settings] > [Display] > [Brig
3	htness]/[Wallpaper]/[Backlight].
	Select an option.
	»»The setting is saved.

Restore default settings

You can reset your phone settings to the original factory settings.

1	Tap	from the main menu screen.
2	Select [Phone settings] > [Factory
3	settings].
	Select if you want to remove the data.
4	Tap [OK] to confirm.

»»All settings are reset.

Note

•• If you select to keep the data when restoring default settings, the contacts, call logs and answering machine messages will be retained.

Demo mode

Demo mode shows key features of the product.	li s h
	E n g
You can exit demo mode by tapping on the
screen.

Call settings

Auto prefix

This feature checks and formats your outgoing call number before it is dialed out.The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out.

Note

•• The maximum length of a detect number is 5 digits.The maximum length of an auto prefix number is 10 digits.

Set auto prefix

1	Tap	from the main menu screen.
2	Select [Call settings] > [Auto prefix].
3	Enter the detect number, then tap [OK] to
4	confirm.
	Enter the prefix number, then tap [OK] to
	confirm.

»»The setting is saved.

Note

•• This is a country dependent feature.

•• To enter a pause, press and hold #.

•• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls.

•• The feature is unavailable if the dialed number starts with * and #.

EN 31