Philips manual Set date and time, Basic operations of your SE630

ENInstall

Set date and time

1.Press mMENU.

2.Scroll :to Clock & Alarm and press mSELECT.

3.Press mSELECT to enter Set Date/Time.

4.Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT.

WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

Now, you are ready to use your phone.

Basic operations of your SE630

Make a call

Enter the phone number (maximum 24 digits) and press rto dial the number.

For details, please refer to "Make a call" on page 17.

Answer or end a call

Press rkey to answer a call.

Pressekey to end a call.

For details, please refer to "Answer a call" and "End a call" on page 18.

Switch the handset on/off

Press and hold ekey for 5 seconds to switch off the handset in stand-by mode.

Short press ekey to switch on the handset again.j

Keypad lock/unlock

Press and hold *key for 2 seconds to lock and unlock the keypad in stand-by mode.

Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

Press c key on the base until the handset starts to ring. Once retrieved, press eto end the paging.

14