Advanced Settings | EN |
|
Dial Mode
The default value for dial mode that is preset in your SE630 should be the best suited for your country network and therefore you should not need to change it.
There are 2 dial modes: Tone or Pulse.
To set dial mode
1.Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press mSELECT.
2.Scroll :to Tone or Pulse and press mSELECT to confirm.
A confirmation beep is emitted and the screen returns to previous menu.
Call Barring
Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers. You can set up to four different barring numbers, with each number containing up to 4 digits.
If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate call barring mode, add or modify call barring number.
To activate/deactivate Call Barring mode
1.Press mMENU, scroll :to Advanced Set and press mSELECT, scroll :to Call Barring and press mSELECT.
2.Enter the Master PIN when prompted and press mOK to confirm.
3.Press mSELECT to enter Barring Mode.
4.Scroll :to On or Off and press mSELECT to confirm.
A confirmation tone is emitted and the screen returns to previous menu.
To modify Call Barring number
1.Press mMENU, scroll :to Advanced Set and press mSELECT, scroll :to Call Barring and press mSELECT.
2.Enter the Master PIN when prompted and press mOK to confirm.
3.Scroll :to Barring Number and press mSELECT.
4.Scroll :to Number 1, Number 2, Number 3 or Number 4 and press mSELECT to confirm.
5.Enter a maximum of 4 digits and press mOK to confirm.
A confirmation beep is emitted and the screen returns to
If a restricted number is dialled, the call will not be connected. When this happens, the phone emits an error tone and returns to
41