Philips 121 manual To select recall type key R setting, To select dial mode tone/pulse

Page 14

To select recall type (key R setting)

The use of some services accessed with R+1, R+2 and R+3 (call waiting, call forward...) will depend on the flash setting (short/ long) according to your installation type (ISDN, Public, PABX).

Press the Program key.

Press R.

Select 1, 2, ..., or 7.

Press the Program key to save the setting. Several flash times are available:

1 = 80 ms ; 2 = 100 ms ; 3 = 120 ms ; 4 = 180 ms 5 = 250 ms ; 6 = 300 ms ; 7 = 600 ms

Refer to your PABX user manual to set the flash time.

To select dial mode (tone/pulse)

Press the Program key.

Press *.

Press 1 (pulse mode) or 2 (tone mode).

Press the Program key to save the setting.

Pulse dialling (also called loop disconnect) is used in countries with DTMF tone dialling capability or using old PABX.

To activate/deactivate key tones

Press the Program key.

Press 7 to activate/deactivate the key tones.

Press the Program key to save the setting.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Contents Handset Display Wall Mounting Installing DectUnpacking your Dect Installing your Dect Dect 121 Handset & Base Dect 121 Keys Using Dect To make a call from the phonebook To store a number in the phonebookPress the Program key Press the Phonebook key To mute the handset To delete the entire phonebookTo recall the last 10 dialled numbers To program voice mailbox To delete the entire Call LogPress the Call Log key To activate/deactivate Baby Call Press the Program key To access voice mailbox Press the Program keyTo program Baby Call To change the earpiece volume Setting Your PreferencesTo set the ring tone volume To set the ring toneTo activate/deactivate key tones Press the Program key To select recall type key R settingTo select dial mode tone/pulse To restore to default settings To change the PINTroubleshooting Problems Causes SolutionsEnvironment & Safety Safety Information
Top Page Image Contents