Philips 121 manual Environment & Safety, Safety Information

Page 17

Environment & Safety

Safety Information

This equipment is not designed for making emergency calls when the power fails. An alternative has to be made available for making emergency calls.

Power Requirements

The product requires an electrical supply of 220-240V, alternating monophased power, excluding IT installations defined in standard EN 60-950.

WARNING

The electrical network is classified as hazardous according to criteria in the standard EN 60-950.The only way to power down the product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Telephone Connections

The voltage on the network is classified as TNV-3 (Telecommunications Network Voltages) as defined in the standard EN 60-950.

Safety Precautions

Do not allow the handset to come into contact with liquids. Do not open the handset or the base station.This could expose you to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials.

Environmental Care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phones and where possible promote their recycling.

Conformity

We, PHILIPS Consumer Electronics Route d`Angers

72081 Le Mans Cedex 9 France

Declare that the products DECT121xx are in compliance with ANNEX IV of the R&TTE-Directive 1999/5/ EC and then with the following essential requirements:

Article 3.1 a: (protection of the health & the safety of the user) Safety : EN 60950-1 (10/2001) SAR : EN 50371 (2002)

Article 3.1 b: (protection requirements with respect to electromagnetic compatibility)

EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)

Article 3.2: (effective use of the radio spectrum) Radio : EN 301 406 V1.5.1 (2003)

The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC is

ensured.

 

Date: 04/03/2005

Le Mans

0682

Product Quality Manager

Home Communication

16This product can only be connected to the analogue telephone network of the country indicated on the sticker located under the base station.

Image 17
Contents Page Contents Handset Display Wall Mounting Installing DectUnpacking your Dect Installing your Dect Dect 121 Handset & Base Dect 121 Keys Using Dect To make a call from the phonebook To store a number in the phonebookPress the Program key Press the Phonebook key To mute the handset To delete the entire phonebookTo recall the last 10 dialled numbers To program voice mailbox To delete the entire Call LogPress the Call Log key To activate/deactivate Baby Call Press the Program key To access voice mailbox Press the Program keyTo program Baby Call To set the ring tone volume Setting Your PreferencesTo change the earpiece volume To set the ring toneTo activate/deactivate key tones Press the Program key To select recall type key R settingTo select dial mode tone/pulse To change the PIN To restore to default settingsProblems Causes Solutions TroubleshootingSafety Information Environment & Safety