Philips 121 manual To change the PIN, To restore to default settings

Page 15

To change the PIN

The PIN is a 4-digit password. It protects the handset & base from misuse. The default PIN is 0000.

Press the Program key.

Press 1 and then enter the default/existing 4-digit PIN code.

Press the Program key.

Enter the new 4-digit PIN.

Press the Program key.

Enter again the new 4-digit PIN.

Press the Program key to save PIN code.

Warning: For all settings where you must enter the PIN code, if the PIN code you entered is wrong, a long beep is emitted and the phone returns to idle mode. You have to restart the setting and enter the correct PIN.

To restore to default settings

This procedure allows to reset the phone to default settings.

Press the Program key.

Press 9 and then enter your 4-digit PIN code.

Press the Program key to save the setting.

Image 15

Contents Page Contents Handset Display Installing Dect Unpacking your DectWall Mounting Installing your Dect Dect 121 Handset & Base Dect 121 Keys Using Dect To store a number in the phonebook Press the Program key Press the Phonebook keyTo make a call from the phonebook To delete the entire phonebook To recall the last 10 dialled numbersTo mute the handset To delete the entire Call Log Press the Call Log keyTo program voice mailbox To access voice mailbox Press the Program key To program Baby CallTo activate/deactivate Baby Call Press the Program key To set the ring tone Setting Your PreferencesTo set the ring tone volume To change the earpiece volumeTo select recall type key R setting To select dial mode tone/pulseTo activate/deactivate key tones Press the Program key To change the PIN To restore to default settingsProblems Causes Solutions TroubleshootingSafety Information Environment & Safety