Uniden FP102 manual Placing a Telephone Call, Redial, Receiving a Telephone Call

Page 18

USING YOUR FP102

USING YOUR FP102

LED indicators

1.call LED indicator: Red light which flashes when the telephone is ringing.

This is sometimes referred to as a ‘Visual Ringing Indicator’.

2.status LED indicator:

a.Solid red light when ‘In Use’.

b.Solid green light when in Speakerphone mode.

c.Flashing green light when on ‘Hold’.

PLACING A TELEPHONE CALL

1.Remove the Handset from the Base, or press the button.

2.Press the keypad buttons to dial the phone number you want.

3.After you have completed the phone call, place the Handset back on the Base.

REDIAL

If you want to redial the last number dialed, simply pick up the Handset or

press the button, then press the button. The telephone will automatically redial the last number dialled.

RECEIVING A TELEPHONE CALL

When the phone rings, pickup the Handset from the Base, or press the button and begin the conversation.

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (New Zealand Model only)

While talking you hear the Call Waiting beep signal.

Press the button. This feature sends a 600mS timed “hook-flash” on the telephone line for accessing services such as Call Waiting, etc.

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

18

Image 18
Contents FP102 Introduction Contents Contents Important Information Caring for Your Telephone Important InformationImportant Notes Please Read Before USEParts Checklist For New Zealand Model Parts Checklist PlugFeatures Features Functions NEW Zealand ModelsAustralian Models Functions Call LED Status LEDInstallation Handset Cord ConnectionTelephone Line Cord Connection Installation Wall MountingStoring ONE-TOUCH Speed Dial Memories Using Your FP101Memory Dial Numbers Memory Storage CardDialing Stored Numbers Using Your FP102Pause Chain DialingAdjusting the Ringer Volume Control Adjusting the Ringer Tone ControlAdjusting the Speakerphone Volume Control Redial Accessing the Call Waiting Service UsingPlacing a Telephone Call Receiving a Telephone CallPlacing a Call on Hold Call Waiting Button Australian Model onlyMute Music on HoldCall Minder Divert OnExample Divert OffCall Waiting Off Call Back Block CID Call Return Message BankUsing Your FP102 This page intentionally left blank Troubleshooting Problem SuggestionSpecifications Specifications for New Zealand ModelSpecifications for Australian Model Warranty One-Year Limited WarrantyYOU