USING YOUR FP102
ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (Australian Model only)
1.While talking, you hear the call waiting signal (series of beep tones).
2.Press the 
button then 
to switch call and put the current call on hold.
3.To switch back to original call, press the 
button then 
.
NOTE: The 
+ 
call waiting procedure toggles call between the incoming
and the original call (vice versa). The 
+ 
procedure will drop the current call connection and pick up the incoming call or the call on hold.
MUTE
Press and hold the 
button to turn off the Handset microphone, allowing private and confidential conversations in the same room without the calling party
hearing. Release the 
button to resume the conversation with the calling party.
PLACING A CALL ON HOLD
1.To place a call on hold, press the 
button. The status LED will flash green and you can hang up. (The Party on Hold will hear music).
2.To begin the conversation again:
Pick up the Handset or press the 
button or pick up an extension phone, the hold function will then be automatically released.
MUSIC ON HOLD
When a call is placed on Hold, the status LED flashes and the telephone will play a popular melody to reassure your caller that the call has not been disconnected.
SPEAKERPHONE
To answer an incoming call, press the 
button and begin your hands free SpeakerPhone conversation. Lift the Handset to resume normal conversation
USING YOUR FP102
19