USING YOUR FP102
USING THE
Instant access to some of Telstra’s most popular network service features have been factory programmed into this telephone for your convenience.
Block CID
Each time you make a call, your telephone number is automatically forwarded to the party you are calling (unless your number is a silent number). In certain cases you may wish to prevent your number being sent.
Pick up the handset or press the 
button. Wait for the dial tone, press
the 
button and then dial the telephone number of the person you wish to call. Your telephone number will be withheld for this call only.
Divert On
Telstra’s ‘Call Forward No Answer’ Service is available for diverting calls to another number if your phone is not answered within 20 seconds (approximately 7 or 8 rings).
Pick up the handset or press the 
button. Wait for the dial tone, press
the 
button and then hang up. The telephone will automatically dial the access code ‘*61#’ and will enable ‘Call Forward No Answer’ to the fixed num- ber you have previously assigned the divert to.
NOTE: To program, or 
example below, replacing the number 9876 5432 with the number you wish to divert calls to.
Pick up the handset or press the 
button. Wait for the dial tone then
press 
. You will hear a long beep and a voice announcement confirming that this feature has been activated, then you can hang up.
To confirm the diverted number, turn ‘Call Waiting’ off, then dial your own number. The number you are forwarding your calls to will begin to ring. The normal Local, Mobile or National Call charges will apply.
USING YOUR FP102
23