Installing the base station
To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall socket.The green indicator on the base station indicates that the phone is properly installed.
! Warning ! The electrical network is classified as dangerous according to criteria in the standard EN
Warning : Always use the cables provided with the product.
Do not insert anything in this opening
Installing and replacing the batteries
To insert the batteries, open the battery cover, place the batteries as indicated and put the battery cover back.When the handset is placed on the base, the 3 battery bars scroll (if charge is needed). Allow the handset to charge for 24 hours to reach full charge. On first use it may be necessary to wait for a few minutes before seeing symbols on the display.
In case you need to change the batteries, the following type is mandatory R03/AAA NiMh 600/650 mAh.
Warning : It is advisable to plug the base station into the mains when charging. Always use rechargeable batteries.
Batteries should not be disposed of with general household waste.
Battery life and range
The battery life is about 250 hours in stand by time (when the handset is in idle mode & ready to receive a call) and around 16 hours in communication. A low battery alert will inform you that the handset has to be charged, if this is during a call, the call will end shortly after the alert.
Optimal battery life is reached after 3 cycles of full charge/discharge.
Under ideal conditions the range is a maximum of 50 meters indoors and 350 meters outdoors.When reaching the range limit, the conversation will become crackly, move closer to the base station otherwise the call will be cut off.To reach optimal range place the base station away from electrical appliances.
6 | Installing the phone |