Philips DECT511, DECT515 user manual Conformity,Environment and Safety

Page 13

Conformity,Environment and Safety

Safety information

This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

Conformity

Hereby, Philips declares that the DECT 511xx and DECT 515xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.This product can only be connected to the analogue telephone network of the UK and Ireland.

Power requirements

This product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT installations defined in standard EN 60-950. In case of power failure, the communication can be lost.

Warning !

The electrical network is classified as hazardous according to criteria in the standard EN 60-

950.The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950.

Safety precautions

Do not allow the handset to come into contact with water. Do not open the handset or the base station.You could be exposed to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials.

Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

12	Conformity, Environment and Safety

http://www.philips.com/faqs/dect

Image 13

Contents Charge the handsets 24 hours before use Store Quick start guideEarpiece Microphone Dect 511/DECT HandsetIcons on the handset display Paging key Base stationPlay/Stop key Skip/Fast forward keyTable of contents Troubleshooting Operator services ExtraAnswer machine IntercomSMS Menu structureHandset list Only available in the UK Menu structure Choose country/oper First ring On or Off Conformity,Environment and Safety Declaration of conformity Using GAP standard complianceUnpacking your Dect Installing the Dect 511/515Installing and replacing the batteries in the handset Installing the base stationBattery life and range How to navigate in the menus Idle modeIntroduction Philips screen saverBasic principles Call features Editing systems Case modeStandard multi-tap system Keypad Keys Multi-tap Sequence To send an SMS to a phone Send new SMSTo read an SMS/to view the number Read SMSTo forward an SMS To reply to an SMSTo delete an SMS To send againTo copy a number to the phonebook To set the SMS mode SMS settingsTo call from the SMS list To set your personal SMS boxes only available in the UKTo choose by default an SMS centre To set the SMS centre numbers Registration To activate/deactivate the babysit modeHandset To register a handsetDate & time Rename handsetTo select a base station To rename a handsetBacklight Display contrastScreen saver Saved messages To switch the Dect 515 Telephone Answer Machine ON/OFFTo play and go to next saved messages via the base station To play and browse through saved messages via the handsetTo delete a message via the handset To delete a message via the base stationTo select the answer mode and the outgoing message OGM type SettingsTo record your personal outgoing message OGM To set the voice language To set the number of rings before answeringTo set the call screening To activate and deactivate the remote controlTo set the recording quality To remotely control your answer machine To change the remote control codeTo record a memo Record and listen to a memoTo listen to a new memo To listen to a saved memoCall transfer to a specific handset when on line Fast call transfer when on lineInternal call Call transfer via the in-call optionsConference call via the in-call options Add new Group settingsView To add a name to the phonebookTo change a number To callTo change a name To delete an entry To change the SMS box number only available in the UKTo send an SMS from the phonebook To listen to a message Dect 515 only To view the call logTo call / redial To store the caller’s number To view the numberTo delete a name and a number To send an SMS from the call logDelete all Call log settingsTo delete all the call log Scroll to Delete allExample of service Call forward Operator servicesTo activate call forward To deactivate call forwardTo set the alarm clock Alarm clockTo activate / deactivate the alarm clock Call durationTo set the alarm ring tone type and ring tone volume Do not Disturb modeTo set the Do not Disturb mode Base ring tones Handset ring tonesTo set the external ring tone To set the internal ring tone ring tone for internal callsGroup ring tones Handset ring tone volumeTo set the group ring tones To delete a downloaded ring tone My ring tonesTo play a recorded melody To record a new melodyTo delete a recorded melody To set the base loudspeaker volume only available for DectTo set the earpiece tone To set the notification beep To set the key & feedback tonesTo activate/deactivate the music on hold Line settings Enable registrationTo change the dial mode Base stationTo change the recall type To change the configurationTo activate and deactivate the first ring Service code settings FAQ FAQ Problems Problems Causes Solutions PABX/PSTN IRL Information on Text Messaging SMS in Eire Information on Text Messaging SMS in the UK Page Download of ring tones