To set the call screening
This feature allows you to activate or deactivate the base station loudspeaker so that you can choose whether to hear or not the callers leaving a message.
You can set permanent call screening on the base station.
Press to enter the carousel menu
Scroll to Answer machine and select 
Scroll to Answphone settings and select 
Scroll to Call screening and select 
Press to select Off or scroll to | Low, Medium, High or |
Boost and select 
Note: this feature is activated by default on Medium level.
Call screening “call by call” on the handset is also possible.While the caller is leaving a message,
press 
to listen and press 
again to stop listening. Adjust the volume with 
.
To set the recording quality
There are 2 recording qualities: standard and high. In standard quality the total capacity is 30 minutes and in high quality the capacity is up to 15 minutes.
Press to enter the carousel menu
Scroll to Answer machine and select 
Scroll to Answphone settings and select 
Scroll to Recording quality and select 
Choose between High or Standard and select 
To activate and deactivate the remote control
Press to enter the carousel menu
Scroll to Answer machine and select 
Scroll to Answphone settings and select 
Scroll to Remote control and select 
Select Mode
Press to select ON or scroll to 
OFF and select 
Note: the default setting is OFF. Activate this feature if you want to be able to remotely use the answer machine.
Answer machine | 35 |
http://www.philips.com/faqs/dect