Philips XL340 Getting started, Connect the base, Connect the charger, Charge batteries ! Warning

Page 10

3 Getting started

2Connect the charger adaptor to the wall mains supply.

3.1 Connect the base

Place the base station close enough to the telephone and the mains power sockets so that the cables will reach.

1Connect the telephone line cord to the phone socket on the bottom of base unit and the wall phone sockets.

2Connect output plug of power adapter to the

power socket on the bottom of base unit. Connect the power adapter to the wall mains supply.

!Warning

The electrical network is classified as dangerous according to criteria in the standard EN 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

3.2 Connect the charger

If you have bought a multi-pack product, each extra handset comes with a charger and a charger adaptor.

1Connect the output plug of the charger adaptor to the bottom of the charger.

3.3Insert the batteries in the handset 1 Place the two rechargeable batteries

(included) into the battery compartment.

! Warning

Verify the batteries polarity when inserting the batteries. Incorrect polarity may damage the product.

2Slide the battery door firmly into place.

! Warning

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE RECOMMENDED TYPE SUPPLIED WITH THIS PRODUCT. NEVER USE NON-RECHAR- GEABLE BATTERIES.

3.4Charge batteries ! Warning

The base station must always be plugged into the mains when charging or when in use.

Note

If the batteries are completely exhausted, the product will not be able to power-on immediately. Handset may get warm during initial charge. This is normal.

8

Getting started

Page 9 Page 11
Image 10
Page 9 Page 11
Contents XL340 EN Telephone Welcome mode Table of contents Technical data Frequently asked questions Index Quick reference table for menusImportant information Disposal instructions for batteries Packaging informationYour phone Volume down Key Redial, Cancel & Recall key Use to cancel an operationMicrophone Volume up Key Overview of the phone Earpiece Display Direct memory keysKey Overview of the baseDisplay icons Connect the charger Getting startedConnect the base Charge batteries ! WarningStandby mode Low battery warningBattery life and range Verify the signalUsing your phone Conference call Join a conversation Make a second callAnswer a second call Exit from Conference callLower case input table Use more of your phone 5.1.3 Delete all memories Advanced features Register a handset Select ringing melody In standby modeChange the ringing volume Turn the backlight on/offBase selection Index Number Reset your phoneSelect a base Un-register a handsetSelect flash duration Select dial mode country dependentTemporary tone dialing in pulse dial mode Flash duration Index Number11Message waiting indication 12Paging handsetDefault settings Functions Settings after ResetQuick reference table for phone menus Index Number MenuTechnical data Frequently asked questions Index What’s in the box Page Koninklijke Philips Electronics N.V. All rights reserved
Related manuals
Manual 30 pages 34.92 Kb
Top Page Image Contents