Philips CD495, CD490 user manual Power requirements, 60950, To avoid damage or malfunction

Page 5

1Important safety instructions

Power requirements

This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost.

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN

60950.

Warning

•• The Electrical network is classified as hazardous.The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

To avoid damage or malfunction

Caution

•• Use only the power supply listed in the user instructions.

•• Use only the batteries listed in the user instructions.

•• Risk of explosion if battery is replaced by an incorrect type.

•• Dispose of used batteries according to the instructions.

•• Always use the cables provided with the product.

•• Do not allow the charging contacts or the battery to come into contact with metal objects.

•• Do not let small metal objects come into contact with the product.This can deteriorate audio quality and damage the product.

•• Metallic objects may be retained if placed near or on the handset receiver.

•• Do not use the product in places where there are explosive hazards.

•• Do not open the handset, base station or charger as you could be exposed to high voltages.

•• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

•• Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.

•• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

•• Do not allow the product to come into contact with liquids.

•• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

•• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

•• Do not drop your phone or allow objects to fall on your phone.

•• Active mobile phones in the vicinity may cause interference.

When using the phone as a baby monitor

Caution

•• Children should be supervised to ensure that they do not play with the appliance.

•• Make sure the baby unit and the cord are always out of reach of the baby (at least 1 metre/3 feet away).

•• Keep the parent unit at least 1.5 metres/5 feet away from the baby unit to prevent acoustic feedback.

•• Never place the baby unit inside the baby’s bed or playpen.

•• Never cover the parent unit and the baby unit with anything (e.g. a towel or blanket). Always make sure the cooling vents of the baby unit are free.

•• Take every precaution to make sure that your baby can sleep safely .

•• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•• If you place the parent unit next to a transmitter or other DECT appliance (e.g. a DECT telephone or wireless router for the internet), the connection with the baby unit may be lost. Move the baby monitor further away from the other wireless appliances until the connection is restored.

•• This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

About operating and storage temperatures

Operate in a place where temperature is always between 0°C to +40°C (up to 90% relative humidity).

Store in a place where temperature is always between -20°C and +45°C (up to 95% relative humidity).

Battery life may be shorter in low temperature conditions.

English

EN 3

Image 5
Contents Register your product and get support at Page Contents Text and number input tables Set the answer mode Announcements Incoming messages ICMSend an alert Set the baby cry level When using the phone as a baby monitor Power requirementsAbout operating and storage temperatures 60950Your phone What is in the boxCongratulations on your purchase and welcome to Philips Quick start guideOverview of the phone CD490 Find handsets Enter registration modeOverview of the base station MicrophoneMain menu icons Alarm Set date and time, alarm, alarm tone etcDisplay icons It flashes when there is a new missed callConnect the base station and charger Get startedSet the country/language Install the handsetSet the date and time Set the date and time formatCheck the battery level What is standby mode?Check the signal strength Charge the handsetMake a call CallsAnswer a call Adjust the earpiece/speaker volumeEnd a call Mute the microphoneMake a conference call with the external callers Switch between two callsAnswer a second call Make a call to another handset Switch between callsTransfer a call While you are on the phoneDuring an external call Make a conference callDuring the conference call Press ConfEnter text and numbers Text and numbersPhonebook Access the phonebook during a callView the phonebook Search a recordEdit a record Add a recordDelete a record Delete all recordsAdd a contact to the exception list Set the personalized melodyCall list type Call logView the call records Save a call record to the phonebookDelete a call record Return a callDelete all call records Select Delete, then press OK toRedial list Sound settings Phone settingsSet the handsets ringtone volume Silent modeName the handset ECO modeSet the date and time Set the display language Display settingsSet the backlight of the LCD screen Select Menu Display VisualSet the alarm Alarm clockTurn off the alarm Before the alarm ringsCall barring ServicesAuto conference Auto prefix Dial modeNetwork type Select the recall durationRegister the handsets First ringAuto clock Unregister the handsets Call servicesManual registration Call forwardCall back service Restore default settingsCall return Hide your identityActivate/Deactivate the baby monitor Baby monitorSend an alert Send to other handsetsSelect Menu Baby cry level, then Set the baby cry levelSend to a contact from the phonebook Turn the answering machine on or off Set the answer modeSet the answering machine language AnnouncementsIncoming messages ICM Restore the default announcementRecord an announcement Listen to the announcementDelete an incoming message Listen to the incoming messagesDelete all old incoming messages Call screeningSet the sound quality of the message Set the ring delayRemote access Behavior of the LED display on the base station Menu structure Silent modeRing Tone Key tonePBX External line 600mA Power consumption Technical dataUse GAP standard compliance Declaration of conformityCompliance with EMF Disposal of your old product and batteriesPage Handset does not ring Frequently asked questionsText and number input tables AppendixEnglish GAP IndexPIN Phone settings PhonebookEC Declaration of Conformity Philips Consumer Lifestyle HK-1151-CD495 Year Page Page 0168