Philips CD495, CD490 Set the sound quality of the message, Set the ring delay, Remote access

Page 39

Set the sound quality of the message

You can adjust the sound quality of the messages received from the answering machine.

1

Select [Menu] > > [Msg quality], then

2

press [OK] to confirm.

Select the new setting, then press [OK] to

 

confirm.

»»The setting is saved.

Note

•• The sound quality can only be adjusted before recording starts.

Set the ring delay

You can set the number of times the phone rings before the call goes to the answering machine..

1

Select [Menu] > > [Ring delay], then

2

press [OK] to confirm.

Select a new setting, then press [OK] to

 

confirm.

»»The setting is saved.

Note

•• Make sure that the answering machine is switched on before this feature can be applied.

Tip

•• When you access the answering machine remotely, you are recommended to set the ring delay to[Toll saver] mode.This is a cost effective way to manage your messages.When there are new messages, the answering machine picks up the call after 3 rings;When there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code.

Note

•• The remote access PIN code is the same as your system PIN.The preset PIN is 0000.

Change the PIN code

1

Select [Menu] > > [Remote access] >

2

[Change PIN], then press [OK] to confirm.

Enter the old PIN, then press [OK] to

3

confirm.

Enter the new PIN code, then press [OK]

4

to confirm.

Enter the new PIN code again, then press

 

[Save] to confirm.

»»The setting is saved.

Activate/deactivate the remote access

You can allow or block remote access to the answering machine.

1

Select [Menu] > > [Remote access],

2

then press [OK] to confirm.

Select [Activate] / [Deactivate], then press

 

[OK] to confirm.

»»The setting is saved.

Access the answering machine remotely

1

Make a call to your home number with a

2

touch tone phone.

Enter # when you hear the announcement.

3

Enter your PIN code.

»»You now have access to your answering machine, and you can listen to the new messages.

Note

•• You have 2 chances to enter the correct PIN code before your phone hangs up.

English

EN 37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Register your product and get support at Page Contents Set the answer mode Announcements Incoming messages ICM Send an alert Set the baby cry levelText and number input tables 60950 Power requirementsWhen using the phone as a baby monitor About operating and storage temperaturesQuick start guide What is in the boxYour phone Congratulations on your purchase and welcome to PhilipsMicrophone CD490 Find handsets Enter registration modeOverview of the phone Overview of the base stationMain menu icons Alarm Set date and time, alarm, alarm tone etcDisplay icons It flashes when there is a new missed callConnect the base station and charger Get startedSet the date and time format Install the handsetSet the country/language Set the date and timeCharge the handset What is standby mode?Check the battery level Check the signal strengthMake a call CallsMute the microphone Adjust the earpiece/speaker volumeAnswer a call End a callSwitch between two calls Answer a second callMake a conference call with the external callers While you are on the phone Switch between callsMake a call to another handset Transfer a callPress Conf Make a conference callDuring an external call During the conference callEnter text and numbers Text and numbersSearch a record Access the phonebook during a callPhonebook View the phonebookDelete all records Add a recordEdit a record Delete a recordAdd a contact to the exception list Set the personalized melodySave a call record to the phonebook Call logCall list type View the call recordsSelect Delete, then press OK to Return a callDelete a call record Delete all call recordsRedial list Silent mode Phone settingsSound settings Set the handsets ringtone volumeECO mode Set the date and timeName the handset Select Menu Display Visual Display settingsSet the display language Set the backlight of the LCD screenBefore the alarm rings Alarm clockSet the alarm Turn off the alarmServices Auto conferenceCall barring Select the recall duration Dial modeAuto prefix Network typeFirst ring Auto clockRegister the handsets Call forward Call servicesUnregister the handsets Manual registrationHide your identity Restore default settingsCall back service Call returnSend to other handsets Baby monitorActivate/Deactivate the baby monitor Send an alertSet the baby cry level Send to a contact from the phonebookSelect Menu Baby cry level, then Announcements Set the answer modeTurn the answering machine on or off Set the answering machine languageListen to the announcement Restore the default announcementIncoming messages ICM Record an announcementCall screening Listen to the incoming messagesDelete an incoming message Delete all old incoming messagesSet the ring delay Remote accessSet the sound quality of the message Behavior of the LED display on the base station Key tone Silent modeMenu structure Ring TonePBX External line 600mA Power consumption Technical dataDisposal of your old product and batteries Declaration of conformityUse GAP standard compliance Compliance with EMFPage Handset does not ring Frequently asked questionsText and number input tables AppendixEnglish GAP IndexPIN Phone settings PhonebookEC Declaration of Conformity Philips Consumer Lifestyle HK-1151-CD495 Year Page Page 0168
Top Page Image Contents