Registration Code
Registering the
Handset to the
DECT System
Selecting the DECT System
17 Menu: System
The handset can be operated with a maximum of 5 DECT sys- tems. Before you can make a call via the DECT system, the handset has to be registered to the respective system. A sys- tem ID and registration code may be necessary for the registra- tion process. Ask the respective system administrator for the valid registration code. When the handset is not yet subscribed to the system the display is showing ”Please, subscribe”.
All settings in this chapter are started by pressing the softkeys:
Menu | System | OK |
Then select… |
| |
Subscription | OK >Subscribe HS< OK F | |
- | Subscribe | OK |
or
- 
Use
or
-
Cancel OK
The following entries must be made when logging on:
: this code is used to get access to the
DECT System.
: a system ID should only be entered if you are at a location where two DECT systems overlap.
: give the name of the DECT system to which you are registering. This will be shown on the idle display. For informa- tion concerning the entry of characters, refer to ”Entering Characters / Names”.
: the phone number, assigned to your DECT handset can be entered here (ask your system administrator for the phone number).
Subscription OK 
select a System Options Select
OK
If the handset has been registered to several DECT systems, then you can select which one the handset is to use. Select the system via the arrow keys before confirming ”Select”. By choosing Options Select , the function automatic search is disabled. The selected system is shown in the idle display.
30