1 Important Safety Information
Only use this product in countries where the appropriate authorities have given their authorisation.
The CE symbol on the product certifies its conformity with the technical guidelines concerning user safety and electro-mag- netic compatibility valid at the time of approval; in accordance with European directive No. 91\263\EEC.
This product complies with IP50 - according to IEC 529/ EN 60 529.
Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other equip- ment. This also applies for DECT equipment. However due to the very low transmission power level the changes for interfer- ence are very small. Research proves that operational DECT phones normally don't influence electronic equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT phones operate in straight nearness of sensitive electronic equipment incidental influence can appear. You are advised not to place the DECT phone on or close (less then 10cm) to this kind of equipment, even in standby mode.
Please also use the other documentation supplied with the var- ious parts of your telephone system.
The mains voltage of the adapter should match the local mains voltage, this can be 110V or 220V. Check if both voltages do match before installing the charger and adapter.