11
Setup
When the manager is launched it automatically ATTACHES to the network, just as a wireless phone. The service provider specific settings defined in the settings are NOT needed to attach to the network, but are needed to become GPRS Data Enabled mode. The SMS settings are required to send and receive SMS.
In the attached state a user will be able to ONLY
-Receive and Place Phone Calls
-Receive and Send SMS
Before Connecting to the GSM/GPRS network you must configure the following settings.
SMS Settings:
-Only Necessary if the Utilization Code is not already on your SIM. Ask your service provider.
-Service Center Utilization Code (page 16)
GPRS Data Settings:
-APN (page 12)
-IP (page 12)
-DNS (page 12)
The following details how to access and change your necessary settings.
Accessing the Modem Settings
To access the modem settings, click View at the lower left portion of the
Modem Manager screen, then click Settings.
Win CE | Palm® |
Figure 6. Accessing modem settings
Enfora, Inc. 661 East 18th Street Plano, TX