Configuration Settings
RFID Settings
1.Go to Start > Settings > Control Panel.
2.Select Configure > RFID.
3.Choose one of the available options.
Report Settings
In the RFID Decoding Properties, do the following to view or modify Report Set- tings:
1.Under Decoding Properties, go to
Configure > RFID > Report Settings.
2.Report Frequency controls how often RFID tag data is reported to an application. When set to a specific number of tags, data is reported when at least that many new tags have been read. When set to Infi- nite, data is only reported when a painting operation is complete.
3.Select the checkboxes for Read Class 0 Tags, Read Class 1 Tags or Read Class 1 Gen 2 Tags to enable/disable the device to read each class of RFID tags. Improved performance can be achieved by enabling only the class of tags which will be used, if known.
At least one of the tag types must be enabled.
Addendum | 9 |