Configuration Parameters

The following table lists the configuration parameters which have been added to support RFID. For instructions on how to set these parameters, as well as information on all other configuration parameters, consult the Falcon 4400 Series Product Reference Guide (PRG).

							Defaults
Code Parameter/ Description		I.D. #	Type	Acceptable Input		(10 seconds)
Code Parameter/ Description		I.D. #	Type	Acceptable Input	Min		Max	Fac-
								Fac-
								tory
								tory

	Other Controls			Enter 1 for On and 0 for Off.

Label				Any single
Label	Indicates the label sepa-			ASCII
Separa-	Indicates the label sepa-	0028	Value	ASCII	CR		CR	CR
Separa-	rator.	0028	Value	character (00 =	CR		CR	CR
tor				None)
				None)

	RFID			Enter 1 for On and 0 for Off.

Class 0	Enables Class 0 tags to	0D00	On/	On or Off	Off		On	On
Enable	be read.	0D00	Off	On or Off	Off		On	On
Enable	be read.		Off

Class 1	Enables Class 1 tags to	0D01	On/	On or Off	Off		On	On
Enable	be read.	0D01	Off	On or Off	Off		On	On
Enable	be read.		Off
Class 1	Enables Class 1 Genera-		On/
Gen 2	Enables Class 1 Genera-	0D02	On/	On or Off	Off		On	On
Enable	tion 2 tags to be read		Off
Enable

Tag Read	Enables the tag read	0D08	On/	On or Off	On		On	On
Beep	beep.	0D08	Off	On or Off	On		On	On
Enable	beep.		Off
Enable
Read	Selects the power mode		On/	On = Growing
Power	Selects the power mode	0D09	On/	On = Growing	Off		Off	Off
Power	to use for RFID reads.	0D09	Off	Off = Constant	Off		Off	Off
Mode	to use for RFID reads.		Off	Off = Constant
Mode

Allow	Allows all tag data to be		On/
Dupli-	Allows all tag data to be	0D0A	On/	On or Off	Off		On	Off
Dupli-	reported	0D0A	Off	On or Off	Off		On	Off
cates

16	Falcon® 5500 RFID Mobile Hybrid Computer

Min

Max

Fac-

tory

Other Controls

RFID