RFID Electrical Considerations
RFID Electrical Considerations
Operating time
Under normal operating conditions, the RFID battery will last longer than the Falcon battery. Extended continuous operation may result in the RFID battery discharging before the Falcon battery. When using “paint” mode, the battery will last approximately 3 hours.
If the RFID unit fails to operate or produces error messages on the Falcon screen, it could be an indication that the RFID battery is becoming depleted. The red indicator light will begin to flash when the battery gets low. See LEDs/Indicators on page 6 for more information.
Charge time
You must charge the Falcon in the
CAUTION
After the initial charge, normal charge time is approximately 4 hours. The time depends on how much charge is in the battery when charging begins.
Addendum | 5 |