Casio IT-600 manual Configuring Handheld Terminal Settings, Calibrating Touch Screen Alignment

Configuring Handheld Terminal Settings

Calibrating Touch Screen Alignment

Whenever the response of the touch screen is poor, or the operations being executed do not match with the location you are tapping on the touch screen, please recalibrate the alignment of the touch screen using the following method.

•Press the “Fn” key and then press the “4” key after confirming that “F” is displayed in the lower right corner of the screen. The following screen is displayed.

∗The following screen can also be displayed by accessing the menus and tab in order of Start ➝ Settings ➝ Stylus ➝ Calibration.

•Press the stylus against the center of the target mark (+ mark) as indicated on the screen. The screen shown below appears after you press the stylus against the target at five different locations.

•Press the Execute key or tap anywhere on the touch screen.

E-26

IT600_E_P14_39.p65 26 05.10.25, 9:50 AM