Casio IT-600 manual Removing

Page 36

Removing

1.Check that the power is turned off.

If the power is on, always make sure to turn it off by pressing the Power Key.

2.Remove the battery pack.

3.Push on the card. Slowly remove the card after it slightly pops out.

Press

4. Load the battery pack.

Important!

•A miniSD card must be inserted with the top and bottom properly aligned and in the proper direction. Attempting to insert it with an excessive force in the incorrect orientation can risk damage to the connectors and slot. Be careful when inserting a miniSD card.

•The battery pack will not be able to be properly installed if the miniSD card is not properly installed. Reinstall the miniSD card properly if this happens.

•Since data recorded in the Handheld Terminal may be lost if the battery pack is removed for more than 10 minutes, complete the installation (or removing) of miniSD card within 10 minutes.

E-33

IT600_E_P14_39.p65

33

05.10.25, 9:50 AM

Image 36

Contents Series Hand IT600EP00.p65 05.10.25, 1009 AM Safety Precautions Markings and SymbolsPrecautions During Use Disassembly and ModificationForeign Objects Dropping and DamageMoisture Laser LightLocation Heavy ObjectsLCD Screen Optional Lithium-ion Battery Pack IT600EP0107.p65 05.10.25, 945 AM AC Power Supply Backup Copies of All Important Data AC AdaptorOperating Precautions After Service We, the undersigned 0984 Contents Resetting the Handheld Terminal Checking in the Box Handheld Terminal System Configuration USB CradleCradle-type Charger Battery Pack Dual Battery ChargerAC Adaptor for Dual Battery Charger USB Cradle AC Adaptor for Cradle-Type Charger CableLaser Redirection Attachment General Guide USB Loading and Removing the Battery Pack Always keep backup copies of all important dataLoading Removing IT600EP1439.p65 05.10.25, 950 AM Attaching the Neck Strap To attach the neck strapAttaching the Touch Screen Protective Sheet Configuring Handheld Terminal Settings Calibrating Touch Screen AlignmentAdjusting Display Brightness Display Auto DimmerUsing the Laser Scanner Bar Code Scanning Position Never look directly into the laser light Adjusting the Laser Light Emission Width Emission Width Adjustment Bar code Installing Handling miniSD CardsRemoving Performing Communication IR CommunicationBluetooth Communication Resetting the Handheld Terminal If reset does not find a memory problemIf reset finds a memory problem Performing a Full Reset Initialization To perform a full resetIT-600 Specifications CPUOperating Humidity USB Cradle HA-D60IO General GuideUSB Client Port Connecting the USB Cradle Power Supply Status of Indicator USB Cradle HA-D60IO Specifications USBUsing the Cradle-type Charger AC Adaptor Jack Connect the AC adaptor here Terminal Detect Connecting the AC Adaptor for Cradle-type Charger Cradle-type Charger HA-D30CHG Specifications Charging SpecificationsUsing the Dual Battery Charger Separately Charging a Battery Pack Charge Indicator LampConnecting Multiple Dual Battery Chargers Dual Battery Charger HA-D32DCHG Specifications Model ChargingUsing Rechargeable Battery Pack Battery Pack SpecificationsLarge-capacity Battery Pack Specifications Handling the Laser Redirection Attachment HA-D50BN Attaching