Using the CASSIOPEIA USB Cable
You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a computer.
Important
•See “Required System Configuration” on page 44 for the computer system that is required for direct USB connection.
•The illustration below is just one possible connection configuration. The location and layout of USB ports vary from computer to computer. See the documentation that comes with your computer for full details on connecting cables to it.
•You must have ActiveSync installed on your computer in order to exchange data with the CASSIOPEIA over a USB connection. See the ActiveSync Help for details about setting up and using ActiveSync.
To connect to a computer using the CASSIOPEIA USB cable
Important
Before connecting your CASSIOPEIA to a computer, make sure you first install the ActiveSync on your computer. Use the steps below to connect the CASSIOPEIA to your computer when prompted to do so during the software installation procedure.
1.Plug the USB cable into the USB port of your computer.
2.Turn off your CASSIOPEIA.
3.Connect the other end of the USB cable to your CASSIOPEIA.
USB port
CASSIOPEIA USB cable
•To disconnect the USB cable, squeeze in on the buttons on either side of the plug to unlock it, and then pull.
21