Casio E-200 manual Windows Millennium Edition, or Microsoft Windows NT, Windows 2000 Professional

Page 45

Windows Millennium Edition, or Microsoft Windows NT

32 MB of RAM plus an additional 8 MB of RAM for each Office program running simultaneously

Windows 2000 Professional

64 MB of RAM plus an additonal 8 MB of RAM for each Office program running simultaneously

Note

Different minimum system requirements are required when using the applications included on the CASSIOPEIA Applications CD-ROM. See the documentation contained on the CD-ROM for full details.

The cradle that comes with your CASSIOPEIA is designed for USB connection only. If your computer does not have a USB port, you will need to purchase the separate 20Pin/USB host Converter ( JK-744CV) and the serial connection cable (JK-580CA), which allows direct connection between the CASSIOPEIA and your computer's serial port.

Certain computer hardware and/or software configurations may not allow PC Connect to run properly.

Important

When installing ActiveSync on a computer, check to make sure that the specified COM port number correctly indicates the serial port to which the cradle is connected.

Some laptop and sub-compact computers with built-in infrared ports and modems are initially configured so the COM port is not always used as a serial port. In such a case, you must change the setting so the COM port is always used as a serial port. See the documentation that comes with your computer for full details on COM port numbers and settings.

45

Image 45
Contents 200 To reset the Pocket PC Safety Precautions Markings and SymbolsHealth Precautions Precautions During Use Avoid unstable surfaces Rechargeable Battery PackBatteries AC Adapter Display Screen Precautions Operating Precautions Page Contents User Maintenance Terms and Symbols used in this manualInitial Setup Where to go for informationGetting Ready General Guide OperationsAbout the Action Control Recalibrating the Touch Screen Using the StylusAdjusting Display Brightness Adjusting Auto Dimming SettingsChanging Applications Assigned to the Program Button Connecting the Cradle to a Computer Using the CradleCassiopeia To place the Cassiopeia onto the cradleTo connect another USB device to the cradle To remove the Cassiopeia from the cradleTo connect to a computer using the Cassiopeia USB cable Using the Cassiopeia USB CableDirect Connection Cradle Connection Using the AC AdapterInfrared Communication Using a CompactFlash CardStorage Card Modem CardWireless Modem Card To install a CompactFlash card Using an SD Memory Card or Multimedia Card Using the PC Card Unit as an External Power Supply Using a PC Card Unit OptionBuilt-in Storage About the 20Pin/USB host Converter OptionSoftware Applications Main Battery User MaintenanceBackup Battery Backup Battery Very LowReplacing the Main Battery Replacing the Backup Battery Battery cover switch Charging the Battery Pack Performing a Reset Resetting the UnitMemory Error Message Performing a Full Reset Full Reset Memory InitializeErrors Following a Full Reset Troubleshooting Battery pack is damaged or has reached Screen is locked up Possible Cause Recommended Action Cassiopeia Unit Power On Unit Power OffAppendix Button OperationsRAM 64MB SpecificationsRequired System Configuration Requirements for Microsoft OutlookWindows 98, or Windows 98 Second Edition Windows 2000 Professional Windows Millennium Edition, or Microsoft Windows NTFCC Warning Regulatory InformationUnit 6, 1000 North Circular Road London NW2 7JD, U.K Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan