Alpine PMD-B100T Setting a Destination Directly from Map Display, Switching Map Display

261985 PMD-B100_r15.qxd 9/13/06 3:15 PM Page 13

■Setting a Destination Directly from Map Display

1Touch anywhere on map screen.

The current location arrow changes to Crosshair Cursor on the screen.

2Move the cursor to the new desired street.

Note: Use Map Scale Bar to zoom out the map if the destination is far from the current location.

3Touch .

4Select Set as Destination.

5Touch OK to Proceed on the confirma- tion screen.

Note: To use other functions on the confirmation screen, see page 14 for details.

To cancel, touch Previous Screen icon.

Switching Map Display

Touch the Current Position to switch between Map and Arrow modes. You may also configure the system to switch between Map and Split screen modes (see page 29).

Route Mode

= Arrow

(default mode)

Map Mode

Shows a full-screen map of the area while providing turn-by-turn guidance prompts.

Route Mode

= Split

Arrow Mode

Displays three- successive arrow maneuvers all the way to your desti- nation while pro- viding turn-by- turn guidance prompts.

Split Arrow/ Map Mode

Displays a large arrow and larger next-street-name font along side a map screen while providing turn-by- turn guidance prompts.

13