261985
INSTALLATION
■How to Mount Blackbird
WARNING
Improper installation may make the navigation sys- tem fall out from the cradle while driving. Please make sure all locks and knobs are turned tight.
Do not install the navigation while driving.
1 Find a spot suitable for the navigation system. Ensure that both the suction cup and windshield area are clean and free of dirt and grease before attaching it.
Stick the suction cup mount against the windshield. Turn the knob to activate the vacuum to lock the position.
2 |
3 |
4 |
5 |
2Turn the knob counterclockwise to adjust up/down position. Then turn clockwise to set the position.
3Turn the knob clockwise to adjust right/left position. Then turn counter clockwise to set the position.
DEVICE SHOULD NOT BE INSTALLED SO THAT IT OBSTRUCTS THE DRIVER’S VIEW.
4Open the antenna before inserting the navigation system into the cradle. For best reception sensitivity, position the antenna 90 degrees to the main unit.
5Slide the navigation system into the cradle until you hear a click sound.
6Plug the cigarette lighter charger into the cigarette lighter socket.
CAUTION
Remove the navigation system when you are away from the vehicle to prevent theft.
■To Remove the Navigation System from the Cradle
1 Press and hold the eject button on the cradle.
2 Grasp the navigation system behind the antenna and remove by sliding up and out of the cradle.
Note to California consumers: California Vehicle Code 26708 prohibits the placement of any object on windows. Refer to your authorized Alpine dealer for other installation options.
6