4.The Installation Wizard will then start installing to your Pocket PC, beginning with the
Click Next to continue.
5.Next, you will be prompted to choose an installation location on the Pocket PC. RECOMMENDED: To install to a storage card, click No, then choose Storage card from the drop- down pick list. (To install to your Pocket PC’s main memory, click Yes.)
6.The installation to your Pocket PC will take a few minutes. Check your Pocket PC screen to determine when the installation is complete.
7.When CoPilot has been installed
to your Pocket PC, you will be prompted to begin the desktop/ laptop installation. Click Next and follow the
8. As the desktop installation proceeds, you will be given the choice to install the CoPilot map data to your hard drive. This is the recommended option and requires 700 MB of available space. If you choose None, you will need to insert the CoPilot Data Disc each time you download data to your Pocket PC or use CoPilot for trip planning on your desktop.
9.When the installation is complete, a CoPilot icon will appear on your desktop or laptop. You are now ready to start using CoPilot! For software activation, see p. 11.
For NavMan GPS Jacket Users
If you are using this software with the NavMan GPS Jacket (the jacket will have the word NAVMAN molded into the back of it and has a conical antenna), you must also install drivers for the jacket separately.
For the NavMan drivers and installation instructions visit our Support Center on http://www.alk.com or follow this direct link to the FAQs:
http://www.alk.com/support/copilotlive_pocketpc5/faqs.asp
The NavMan FAQ is under the GPS Receiver and Tracking section.
- 7 - | - 8 - |