Disney DPH8010-P manual Quick Reference

Page 3

QUICK REFERENCE (CONTINUED)

1.Set the RINGER switch to the ON position to have the ringer sound when receiving a phone call.

2.Set the Tone/Pulse switch to Tone or Pulse to match the service provided on your telephone line.

3.Connect the coiled handset cord to the base.

4.Connect the straight cord to the telephone base jack and telephone wall jack.

5.When the phone rings, lift the handset and speak into the mouthpiece. Hang up when call is completed.

6.Lift the handset and listen for a dial tone. Press the key buttons (0-9) for the specified number you wish to call.

7.Slide the Receiver VOLUME switch to the HI (High) or NOR (Normal) position as desired.

8.Press the REDIAL button to automatically redial the last number dialed.

9.Press the FLASH button to hang up the phone without having to return it to the base. This is useful for using the phone with the Call Waiting feature.

10.Press and hold the MUTE button and you will be able to hear the person on the other end of the telephone, but they cannot hear you. Release the MUTE button to restore normal sound.

11.Press the PAUSE button to insert a three second pause. This is useful in some cases, such as a PBX or long distance service when a pause may be needed in the dialing sequence

2

Image 3
Contents Page Press to dial a telephone number Quick ReferenceQuick Reference Package List Important Safety InstructionsImportant Safety Instructions Front Location of ControlsBottom Desk or Table Use InstallationBattery Installation Receiving Calls Making Calls Telephone OperationTONE/PULSE Switch Troubleshooting Guide For additional set-up or operating assistance