Disney DPH8010-P manual Battery Installation

Page 9

INSTALLATION (CONTINUED)

Battery Installation

To hear the Disney ring when receiving a call, insert three

(3)AAA size batteries into the bottom of the unit as described below.

NOTE: When the batteries become weak, the unit will revert back to the standard ring.

1.Remove the Battery Compartment screw.

2.Press in on the Battery Compartment tab and lift off the Battery Compartment cover.

3.Insert three (3) AAA size batteries, observing the polarity

as shown.

4. Replace Battery

+

Compartment

+

and screw.

 

+

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer’s directions.)

8

Image 9
Contents Page Press to dial a telephone number Quick ReferenceQuick Reference Package List Important Safety InstructionsImportant Safety Instructions Front Location of ControlsBottom Desk or Table Use InstallationBattery Installation Receiving Calls Making Calls Telephone OperationTONE/PULSE Switch Troubleshooting Guide For additional set-up or operating assistance