When replacing the batteries, make sure the CID is unplugged from the telephone line and AC power, and unplug both modular line cords from the back of the CID.
Note: When replacing the batteries, have fresh ones on hand before you begin. If you do not install the new batteries within 2 minutes after removing the old ones, you will lose the time, date, and area code stored in the CID. (The Caller ID information, however, remains stored in the CID's memory.)
1.Use a Phillips screwdriver to remove the screw from the battery compart- ment cover, then slide off the cover.
2.Put four fresh AAA batteries into the compartment as indicated by the polarity symbols (+ and
3.Turn the CID over so you can see the
display. After you install the batteries, 6(7#$5($#&2'( and 333 appears. The first 3 flashes.
4.Within 2 minutes, repeatedly press REVIEW 8 until the first digit of your area code appears, then press