Radio Shack CID 2903 owner manual Mounting the CID

Page 16

MOUNTING THE CID

You can place the CID directly on a flat surface with the supplied stand. Or, you can mount it on a wall.

Follow these steps to mount the CID on a wall.

1.Turn the CID over, then press in the upper tabs and remove the stand.

2.Select a location near the phone line jack and mark the mounting screw locations 23/4 inch (69 mm) apart on the wall.

3.Drill two 1/8-inch (3.5 mm) holes in the wall at the marked locations.

4.Thread a screw into each hole until the head extends 1/8-inch (3.5 mm) from the wall.

16Preparation

Image 16
Contents CID 2903 Caller ID Risk of Electric SHOCK. do not Open Contents Important Information FCC Information FCC Wants YOU to Know Lightning Features Features9 Installing BATTERIES/ Setup PreparationPreparation11 Review 9 to set the digit. The second 3 flashes Connecting AC Power Connecting the CID Connecting to a Single-Line PhoneConnecting to an Answering Machine Mounting the CID Operation Adjusting the Display ContrastReceiving and Storing Calls 18Operation Reviewing Call Records Flash, indicating that a new call is being receivedDisplayed Call Information #727$/#1#35,9$7#&$ #2#/,6781.121#&$//5 81.121#1$012#&$//6 06*#$,7,167#$5$#&2 21*#,671#&$Deleting CID Records Deleting Individual CID Records86H#5YLHZ#.H\ #83#3+21Using Callback Deleting All CID RecordsOperation25 VIP Call List Press CALLBACK. ,$/,1* 018Marking a VIP Call Record Unmarking a VIP Call Record Troubleshooting Problem Suggestion30Troubleshooting CarePage 10A01 43-2903