43-941.fm Page 18 Friday, January 28, 2000 10:34 AM
MOUNTING THE SYSTEM
You can set the CID-941 flat on a desk, shelf, table or set it at an angle by pulling out the leg located on the bottom of the CID-941.
Mounting on a Wall
To mount the CID-941 on a wall, you need two screws (not supplied) with heads that fit into the key- hole slots on the bottom of the CID-941.
1.Mark the mounting screw locations on the wall with the keyhole slots on the bottom of the CID.
2.Drill a hole in the wall at each marked location.
3.Insert a screw into each hole, letting the head extend 1/8 inch from the wall.
4.Connect the CID-941 (see “Making the Connec- tions” on Page 11). Align the keyhole slots on the back of the CID-941 with the screw heads and slide the system down over the screw heads.
18
